Model : lc15 laney user manual lc series : lc15r www.Laney.Co.Uk.
Important safety instructions warning: when using electric products, basic cautions should always be followed, including the following. 1. Read all safety and operating instructions before using this product 2. All safety and operating instructions should be retained for future reference 3. Obey all...
Laney care of your laney amplifier will prolong it's life.....And yours!. After unpacking your amplifier check that it is factory fitted with a three pin 'grounded' (or earthed) plug. Before plugging into the power supply ensure you are connecting to a grounded earth outlet. If you should wish to ch...
Recommended settings for those of you who can't manage to read the manual before switching the amp on, here are some suggested settings to get you going. These setting illustrate the versatility of this unit and should be used as starting points for obtaining your own tone. All the settings below fe...
Explanation of terms 14 11 12 11 15 ~ ~ 50 watts 50-60hz 50 watts 50-60hz 220-240v 220-240v 100-120v 100-120v ~ ~ ~ ~ 008124a 008124a t100ma t100ma t250ma t250ma t500ma t500ma model no. Lc15 model no. Lc15 line line out out made in the u.K. By blt industries ltd. Made in the u.K. By blt industries l...
Ht fuse: this fuse protects the dc power of the overall amplifier. Use only the correct size and rating of fuse as specified on the panel. If a fuse blows or fails and a replacement of the same size and rating is installed and it in turn blows, the amplifier has suffered a malfunction internally and...
4: connecting your guitar to either the 'hi' or 'lo' input has an effect on the sound regardless of the guitar type/pickup configuration. The 'hi' socket provides more gain and extended treble, but with less bass. The 'lo' socket provides a full range signal with extended low frequencies and lower g...
Valve replacement and trouble shooting laney 6 6 technical specifications solution 3 replace the secondary fuse and turn on the power. View the output valves. If one valve fails to light up, replace that valve. If the output valves check out ok, another cause of a blown secondary fuse is a damaged p...
