Larin TGL-500 Owner's Manual - Operating Instructions
10
OPERATING INSTRUCTIONS
To Lower the lift
1)
Lower the outrigger tubes so they are about 3 inches above the ground.
2)
Plug in the pistol-grip trigger.
3)
Lower the vehicle tailgate.
4)
Remove the retaining clips and pull the quick release pins from the Deck Plate.
(The Deck Plate will be free to rotate after the pins are pulled, make sure that you
are not in a position to be struck by the Deck Plate.)
5)
Rotate the Deck Plate to the level operating position and replace the pins and clips.
6)
Place the direction selector switch in the “UP” position
7)
Operate the trigger until the Deck Plate is level with the tailgate.
8)
Remove the hold down straps from the load.
9)
Carefully transfer the load to the Deck Plate.
10)
Secure the load with hold down straps.
11)
Lower the outrigger tubes completely down to the ground by turning the shaft.
12)
Lower the load until it is at ground level.
13)
Remove the hold down straps. Carefully transfer the load to ground.
14)
Raise the tailgate.
15)
Change the direction switch to “UP”.
16)
Operate the trigger to raise the Deck Plate until it is about 2 inches above the ground.
17)
Remove the retaining clips and pull the quick release pins from the Deck Plate.
(The Deck Plate will be free to rotate after the pins are pulled, make sure that you
are not in a position to be struck by the Deck Plate.)
18)
Rotate the Deck Plate up to the storage position and replace the pins and clips.
19)
Press the trigger switch to raise the lift all the way up.
20)
Raise the outriggers by turning the shafts.
21)
Pull the pins from the outrigger inner tubes. Return them to their fully up position
22)
Replace the pins and clips in the outrigger inner tubes.
23)
Pull the pins and clips from the outrigger outer tubes.
24)
Rotate the outriggers to their upright stored position and replace the pins and clips.
25)
Unplug and store the pistol-grip trigger in a safe location.
26)
You may use the supplied deck tie-downs to secure the deck plate if desired.
THE HITCH LIFT IN THE UP POSITION
(Tailgate up for clarity.)