Larin TGL-500 Owner's Manual - Important Considerations
11
IMPORTANT CONSIDERATIONS
MAINTENANCE
Visual inspection shall be made before each use by checking for damage, wear, abnormal
conditions such as bent, worn, loose or missing parts, kinked or frayed cable.
To replace damaged, frayed or kinked cable, use only factory supplied spare parts. Refer to the
enclosed parts diagram. Replacement parts for cable assemblies include complete instructions.
Inspect lift immediately if it suspected to have been subject to abnormal load or shock. It is
recommended that this inspection be made by the manufacturer’s authorized repair facility prior to use.
Owners and/or operators should be aware that repair of this equipment requires specialized
knowledge and facilities. It is recommended that an annual inspection be made by the manufacturer’s
authorized repair facility and that any defective parts, decals, or safety labels or signs be replaced with
manufacturer’s specified parts. If you encounter any problems or difficulties contact the manufacturer
toll free at 1-800-87-LARIN. Ask for customer service.
DAMAGED PRODUCT
Any lift that appears to be damaged in any way, or operates abnormally
SHALL BE REMOVED
FROM SERVICE UNTIL IT IS REPAIRED.
It is recommended that necessary repairs be made by a manufacturer’s authorized repair facility
and only factory authorized parts, labels and decals shall be used.
ALTERATIONS
Because of potential hazards associated with misuse of the lift,
NO ALTERATIONS SHALL BE
MADE TO THIS PRODUCT.
Because of potential hazards associated with any other application,
THE MOTORIZED CABLE
MODULE SHALL NOT BE USED FOR ANY OTHER PURPOSE THAN TGL-500 LIFT.