Larin TGL-500 Owner's Manual - page 2

Manual is about: HITCH LIFT

Summary of TGL-500

  • Page 1

    1 owner’s manual model # tgl-500 hitch lift for customer service call or fax 1 (800) 87-larin.

  • Page 2

    2 specifications…….. Max capacity:…………….500 lbs. Motor power:…………… 12 vdc figure 1 contents of carton a description qty part # hitch adapter plate……1 a c lifting arm……………1 b guide arms……………2 c b c pivot tube……………..1 d platform arms…………2 e outrigger support …….1 f d outrigger assemblies….2 g e e f g ...

  • Page 3: Assembly Instructions

    3 assembly instructions important safety information it is the owner and/or operators responsibility to study and understand the safety and operating instructions before operating this lift. Safety information shall be emphasized and understood prior to use. The lift shall be inspected per the instr...

  • Page 4: Assembly Instructions

    4 assembly instructions 1 attach the outrigger arm attach outrigger support (f) to the hitch adapter (a) using two m12 x 75 bolts (#14) a f with m12 flat washers (#5) and m12 nylon lock nuts (#4). 2 attach the outriggers attach the two outrigger assemblies to the far outside lower holes in the outri...

  • Page 5: Assembly Instructions

    5 b assembly instructions 6 position the platform arms onto the pivot tube d do not use any fasteners at this time, simply slide the platform arms (e) onto the ends of the pivot tube (d) b b the assembly should now look like this……………………………. 7 install the deck plate onto the platform arms begin by m...

  • Page 6: Assembly Instructions

    6 assembly instructions 10 install the limit switch use a straight bladed screwdriver to remove the two screws and washers in the location shown by the arrows. The limit switch assembly is packed in a carton with the pistol-grip trigger, some cables and connectors. The limit switch has a round yello...

  • Page 7: Installation Instructions

    7 installation instructions 12 connect the 12 vdc disconnect the vehicle battery positive terminal. You will be making power connections and it is not safe to work with the power connected. The hitch lift uses 12 volts dc, and it will require 40 amps at full load. Most manufacturers will fuse this l...

  • Page 8: Operating Instructions

    8 operating instructions important safety information it is the owner and/or operators responsibility to study and understand the safety and operating instructions before operating this lift. Safety information shall be emphasized and understood prior to use. The lift shall be inspected per the inst...

  • Page 9: To Raise The Lift

    9 operating instructions to raise the lift 1) lower the outrigger tubes so they are about 3 inches above the ground. 2) lower the vehicle tail gate. 3) place the load on the platform. 4) secure the load with hold down straps. 5) place the direction selector switch in the “up” position 6) operate the...

  • Page 10: Operating Instructions

    10 operating instructions to lower the lift 1) lower the outrigger tubes so they are about 3 inches above the ground. 2) plug in the pistol-grip trigger. 3) lower the vehicle tailgate. 4) remove the retaining clips and pull the quick release pins from the deck plate. (the deck plate will be free to ...

  • Page 11: Important Considerations

    11 important considerations maintenance visual inspection shall be made before each use by checking for damage, wear, abnormal conditions such as bent, worn, loose or missing parts, kinked or frayed cable. To replace damaged, frayed or kinked cable, use only factory supplied spare parts. Refer to th...

  • Page 12

    12 one year limited warranty larin corporation warrants its products for a period of one year from the date of purchase against manufacturer or material defects. This warranty does not cover damage caused by accident, misuse, or tampering/altering of the product, and a charge will be made for such r...