Le Maitre G300MkIII Operating manual

Summary of G300MkIII

  • Page 1

    Le maitre’s g300mkiii operating manual high continuous output capability quieter smoke output performance new digital control panel with memory built-in dmx – built-in freezefog connection built-in pre-delay for freezefog use 2kw, single pipe, large mass heat exchanger optional, variable, 200w fan d...

  • Page 2: Safety and Cautions

    Safety and cautions all electro-mechanical machines have the ability to cause injury, either mechanically or electrically. The user should be fully aware of the correct operational procedures involved in the use of this machine, and should feel comfortable about being in control of it. All users sho...

  • Page 3: G300Mkiii Specifications

    G300mkiii specifications power source requirements: 230vac 2200 watt 50hz external fusing: 12at ceramic internal fusing: 500ma pcb transformer fluid capacity: detachable 5-litre bottle carrier control: manual or dmx dmx 512: 3-channels output, smoke on delay, aux fan typical smoke output: 550 m 3 /m...

  • Page 4: Operating Environment

    Operating environment the g300mkiii is an electro-mechanical assembly containing electronic and mechanical devices. All such devices have reduced life spans under adverse temperature and humidity conditions. It is always wise to minimize ‘risky’ operating environments, and provide the machine with s...

  • Page 5: Operation Instructions

    Operation instructions all features are adjusted and set up using the main control panel. The ‘select’ button will sequentially cycle through all the adjustable controls. ‘up’ and ‘down’ buttons will adjust the setting. If held down, they will auto-step. Pressing ‘manual’ and ‘store’ together will m...

  • Page 6: Control

    Control smoke output : 0 – 99% variation smoke pre–delay : time in seconds before actual smoke issue (freezefog use) fan : 0 - 99% phase control for optional fan control output. Timer on : timer for smoke issue or select not used off : timer for interval of non smoke issue or select not used. Dmx dm...

  • Page 7: Warranty

    In dmx mode, the select switch does not function, and all control is via dmx. If ‘dof’ (dmx off) appears on the display, then a proper dmx signal is not being received. Selecting ‘smoke’ before switching to dmx will allow the display to show a response to the connected dmx signal data variation. By ...