Summary of Neutron XS Hazer
Page 1
Www.Lemaitrefx.Com neutron xs operations manual v.01.03.01.
Page 2
Www.Lemaitrefx.Com please read carefully before operating page 1 introduction page 2 warning page 3 technical specifications page 4 operating procedure page 5 remote and external control features page 7 maintenance page 10 recommended fluids page 10 warranty page 11 safety precautions page 12 access...
Page 3
Www.Lemaitrefx.Com capture beams of light with a translucent haze. The neutron xs hazer, rewrites the book on haze technology. Le maitre’s patented sequentially tracked auto reissue technology generates an environment of translucent haze without the use of a compressor or heating block, providing a ...
Page 4
Www.Lemaitrefx.Com m.S.D.S. Available by request or at www.Lemaitrefx.Com warning warning read these important safety instructions do not remove the outer case until power has been disconnected from the machine read these important safety instructions persons suffering from asthma or allergenic sens...
Page 5
Www.Lemaitrefx.Com technical specifications model: neutron xs hazer with s.T.A.R. Technology type: water base haze generating system dimensions: length: 67 cm. / 11.25 width: 28.5 cm. / 9 height: 33 cm. / 10.94 weight with fluid: 11 kg. / 23.75 lbs. Power rating: 115vac 60hz 3.15a 220vac 50hz 1....
Page 6
Www.Lemaitrefx.Com the machine should be fitted with a 2 litre le maitre neutron hazer fluid container. The use of any other fluid will lead to damage of the hazing ele- ment . Remove the main cover by releasing the two thumb screws, situated rear top and front lower and sliding the cover forward,...
Page 7
Www.Lemaitrefx.Com 4.) it will now be necessary to prime fluid into the system to expel any air that might be present. This is done automatically and can take up to eight minutes if fluid feed pipe is empty. Note : on the most recent version of the neutron xs a prime function is available to speed...
Page 8
Www.Lemaitrefx.Com 3.) connect the remote cable connector to the 3 pin xlr located on the rear panel of the neutron xs. 4.) power up the neutron by selecting on at the mains switch. 5.) the power indicator on the neutron re mote should be illuminated at this time. The power indicator remains illum...
Page 9
Www.Lemaitrefx.Com maintenance service note this following will outline the suggested schedule and procedure for maintaining your neutron xs processing tube, including a proper power down procedure which must be followed to en- sure the performance of your neutron xs hazer. The following power do...
Page 10
Www.Lemaitrefx.Com a routine maintenance program is essential for the optimum per- formance of your neutron xs hazer. We recommend that the tube maintenance program be applied at least every 25 hours of use, or when a noticable decrease in output is observed. More frequent maintenance will result in...
Page 11
Www.Lemaitrefx.Com 4.) remove service port cover to allow easy access to the processing coil. 5.) support the processing tube with one hand by simply grasping it firmly near the end of the tube where the haze exits. With abrazor tool in hand, guide it through the service port into the processing coi...
Page 12
Www.Lemaitrefx.Com recommended fluids neutron water based haze fluid the le maitre water based neutron haze fluid provides a translu- cent long lasting, dry haze effect that leaves no residue. For use only in the neutron product range only. Warning!! Never use regular haze fluid in your neutron wa...
Page 13
Www.Lemaitrefx.Com return policy: return of any product must be done within 30 days of purchase. The package must be returned freight prepaid and the ra number clearly marked on the outside of the box. A restocking charge of up to 25% may be levied. Only credits are issued to the dealers account. An...
Page 14
Www.Lemaitrefx.Com 7. Avoid direct haze output continuously at persons, structure or objects within close proximity of the discharge nozzle. 8. Ensure that adequate exhausting arrangements are available in the event of an emergency. 9. Do not place hands, or exposed skin within the first 10cm of the...
Page 15
Www.Lemaitrefx.Com notes 13.