Leckey Easyseat User Manual

Summary of Easyseat

  • Page 1

    User manual easyseat.

  • Page 3

    Contents 1. Intended use 2. Declaration of conformity 3. Terms of warranty 4. Product history record 5. Product training record 6. Safety information 7. How to unpack and assemble the seat 8. Clinical setup for postural management 9. Frequent adjustments for daily use 10. Cleaning & care information...

  • Page 4

    1 intended use the leckey easy seat is a basic seating system for use in the home or the classroom. The seat is available in four sizes catering for the needs of children with disabilities for the age of 1-10 years. The size one and two having a maximum user weight of 30kg and the size three and fou...

  • Page 5

    6.1 always read instructions fully before use. 6.2 users should not be left unattended at any time whilst using leckey equipment. 6.3 only use leckey approved components with your product. Never modify the product in any way. Failure to follow instructions may put the user or carer at risk and will ...

  • Page 6

    6.14 the product is designed for indoor use and when not in use should be stored in a dry place that is not subjected to extremes of temperature. The safe operating temperature range of the product is +5 to +40 deg celsius..

  • Page 7

    How to unpack and assemble 7 congratulations on purchasing your easy seat/potty trainer. Your easy seat/potty trainer will be boxed and wrapped in a bubble wrap packaging on receipt. You should firstly ensure that you remove all the parts from the box and then unwrap them in preparation for assembly...

  • Page 8

    To slot your choice of legs into position, it is important that you identify the left and right hand side of the legs supplied. When in position the popper and castor fixing screw at the base should be in line and facing away from the child. To slot the legs into position push poppers (a), slide the...

  • Page 9

    To attach the footplate to the seat you will need to use the four allen bolts and four washers supplied. Simply line up the footplate bracket with the slots on either side of the front legs. Once in position the footplate is detached by reversing this process. Always make sure the footrest is firmly...

  • Page 10

    The flexible lateral supports are attached by using the allen bolts supplied and securing these into the sliders in the back of the seat. The pommel is attached to the seat by an allen bolt (a) or knob which is located under the seat base. Always remove the pommel before putting the child in or remo...

  • Page 11

    The easy seat can be converted to the leckey potty trainer by simply lifting and removing the seat base and replacing it with the potty insert. If the push handle has been specified at the time of order a bracket will be attached. If the push handle is ordered separately, then the bracket should be ...

  • Page 12

    If the headrest has been specified at the time of order a bracket will be attached. If the headrest is ordered separately, then the bracket should be attached to the back of the seat by securing it with the two allen bolts supplied. The headrest can then be inserted into the receiving bracket by loo...

  • Page 13

    Clinical setup for postural management 8 the clinical setup of the product should be completed by a technically and clinically competent person who has been trained in the use of the product. Leckey recommend a written record is maintained of all clinical setups for this product..

  • Page 14

    The seat depth adjustment allows for growth and also allows for exact femoral support. The backrest can also be set to your preferred angle. Loosening the two sets of allen bolts (a) at either side of the chair alters both of these adjustments. Once these bolts are loosened, the backrest can then be...

  • Page 15

    The footplate can be height adjusted for varying lower leg lengths and also to aid manoeuvrability. To height adjust the footplate, the four allen bolts (a) should be loosened, the footplate raised or lowered to the desired position and the four allen bolts (a) re-tighten securely. A footplate with ...

  • Page 16

    The depth of the pommel can be adjusted by loosening the bolt/knob, positioning and then re-tightening. 8.5 adjusting the pommel.

  • Page 17

    Frequent adjustment for daily use 9 (therapists/carers/parents) parents and carers should be shown how to make frequent adjustments and made aware of the safety checks in section 6 by a technically and clinically competent person who has been trained in the use of the product. Leckey recommend that ...

  • Page 18

    Before transferring the child into the seat carry out the daily product inspection as outlined in section 9 of this user manual. Lock all the castors, ensuring that they are facing outwards to maximise product stability. Make sure the safety buckle on the flexible lateral supports is released and is...

  • Page 19

    The seat can be adjusted to the required height to accommodate lower leg length, to allow for self-transfer or to allow the seat to fit under a nursery table. Simply adjust each leg individually by pressing in the poppers (a) and positioning the leg to the relevant slot to obtain the required height...

  • Page 20

    The height of the armrests and subsequently the tray can be adjusted by loosening the allen bolts (a) on the armrest bracket, adjusting to the required height and re-tightening the allen bolts (a) securely. Place the tray onto the armrests, slide forward to the required depth then turn the handles (...

  • Page 21

    To adjust the height of the headrest loosen the allen bolt (a), position as required and then re-tighten. To adjust the depth, loosen the allen bolt (b), position as required and then re-tighten. Finer angle positioning of the head support can be attained by loosening the three allen bolts (c) makin...

  • Page 22

    How to maintain when cleaning we recommend that you use only warm water and a non-abrasive detergent. Never use organic solvents or dry cleaning fluids. Upholstery and fabrics 1. The upholstery and fabrics can be cleaned by hand whilst in place. When cleaning we recommend that you use only warm wate...

  • Page 23

    (therapists, parents & carers) we recommend that daily visual checks of the equipment are carried out by therapists, carers or parents to ensure the product is safe for use. The recommended daily checks are detailed below. 1. Ensure all adjustment knobs and bolts are in place and secure. 2. Check al...

  • Page 24

    2. Check the chassis height adjustment mechanism is working properly. 3. Lift the base to check each castor individually. Make sure they are moving freely and remove any dirt from the rubber wheels. Check that the brakes lock the wheels securely. 4. Visually check the structure of the product paying...

  • Page 25

    Most leckey products are assessed and ordered to meet the needs of an individual user. Before reissuing a product we recommend that the therapist prescribing the product has carried out an equipment compatibility check for the new user and has ensured that the product being re-issued contains no mod...

  • Page 26

    15 technical information product codes easy seat with fixed legs les/#/fl/-* easy seat with castor legs les/#/cl/-* potty seat with fixed legs lpt/#/fl/-* potty seat with castor legs lpt/#/cl/-* accessories activity tray les/#/a side pads les/#/b-* (price for extra side pads) pommel las/#/c-* flexib...

  • Page 27

    16 technical data 1 1 - 3 les/1 lpt/1 mm inches 400 16 350 14 12kg 760 30 1000 40 30kg 66lbs 225 9 285 11 175 7 250 10 125 5 225 9 150 6 230 9 135 5 225 9 110 4 150 6 5º 10º 75 3 450 18 x420 x16 product sizing size age codes length width weight of product user standing height min max max user weight...