Logic DM800i Instruction Manual - Dm800I

Manual is about: MP3-Compatible AM/FM DVD Receiver

Summary of DM800i

  • Page 1

    Please read this instruction manual carefully before operating your unit. Dm800i instruction manual • dvd/mp3/am/fm/cd receiver • flip down/full detachable front panel • dvd/dvd-r/dvd-rw/svcd/vcd/mp4/mp3/wma/ cd-r/cd-rw compatible • sd/mmc card input • front usb/aux input • 3.2 inch tft-lcd display ...

  • Page 2: Dm800I

    Dm800i mp3-compatible am/fm dvd receiver instruction manual specifications cd/mp3/wma player section signal to noise ratio > 60 db channel separation > 50 db (1khz) frequency response 20hz - 20 khz tuner (fm) frequency range 87.5-107.9 mhz sensitivity 2.8 µv stereo separation 30 db signal to noise r...

  • Page 3: Contents

    Contents before you begin 2 installation 3 installation in the dashboard 3 detaching and attaching the front panel 3 supporting the unit 4 wiring connection 4-5 operation 6 locations of parts (main unit) 66 locations of parts (remote control) 7 general operations 8 listening to radio 9 operations c...

  • Page 4: Before You Begin

    Before you begin precautions: caution: use of controls or adjustment or performance of procedures other than those specified herein may result in hazardous radiation exposure. The use of optical instruments with this product will increase eye hazard. • keep this manual handy as a reference for opera...

  • Page 5: Installation

    Installation precautions • choose the mounting location carefully so that the unit will not interfere with normal driving functions. • avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight or hot air from the heater, or where it would be subject to du...

  • Page 6: Wiring Connection

    Installation & wiring connection to rear camera video out to reverse gear control switch to hand brake switch antenna connector front rear audio out camera in video in video out 1 video out 2 r l l r l r iso connector b a 1 2 3 4 5 6 7 8 4 5 7 8 rear out camera in video in r l l r 10 7 1 2 3 4 4 4 5...

  • Page 7: Wiring Connection

    Wiring connection to rear camera video out to reverse gear control switch to hand brake switch antenna connector front rear audio out camera in video in video out 1 video out 2 r l l r l r iso connector b a 1 2 3 4 5 6 7 8 4 5 7 8 rear out camera in video in r l l r to rear camera video out to rever...

  • Page 8: Operation

    Operation locations of parts (main unit) 1. Power on/off ( ) 2. Select function button 3. Preset stations (1,2,3,4,5 ,6) 4. Equalizer control (eq) 5 . Display button (disp) 6. Stereo/mono button (st) 7. Loudness button (ld) 8. Mode button (mode) 9. Band button (bd) 10. Cd track / search button 11. A...

  • Page 9: Operation

    Use and care of the remote control installing the battery slide the tray out on the back of the remote control and insert the battery with the (+) and minus (-) poles pointing in the proper direction. • on first use, pull out the film protruding from the tray. Cautions • remove the battery if the re...

  • Page 10: Operation

    Operation general operations turning the unit on/off ( ) press “ ” button to turn on unit. To turn off, press and hold the button again. Selecting a source (mode) press mode repeatedly to switch between tuner, cd/dvd, aux in, usb or sd/mmc mode. Loading a disc 1. Press to open the front panel 2. Ins...

  • Page 11: Operation

    Operation reset the reset button is placed on the housing. To reset, use a sharp point object and press and hold the reset button for 2 seconds. The reset button is to be activated for the following reasons: • initial installation of the unit when all wiring is completed. • all the function buttons ...

  • Page 12: Operation

    0 operation random playback press rdm during playback to play the tracks in random/shuffle order. Press it again to cancel. Stopping playback 1. Press stop on remote control during playback to stop playback. That position is stored in memory. 2. Press to continue. Playback starts from the position a...

  • Page 13: Operation

    Icontact icontact operation program playback you can set which tracks to play according to your desired sequence using the prog function. 1. Press and hold prog button on the remote control. 2. Enter the track number besides the memory location. 3. When all tracks have been programmed, select play a...

  • Page 14: Operation

    Operation turning pbc on/off (vcd only) pbc (playback control) is a feature found on vcd 2.0 and svcd 1.0. Pbc allows playback control and user interaction through the remote control or other input device. If pbc on, the player won’t auto start after inserting the disc because it will take time to s...

  • Page 15

    Return to root menu (dvd only) during dvd playback, press and hold menu on head unit or remote control to return to root menu. N te: s me dvd may n t ntain a r t menu. Slow motion playback this feature lets you slow down playback. 1. Press slow on the remote control during playback. 2. Pressing ...

  • Page 16: Operation

    Operation setting up the dvd player you can flexibly customize the unit to suit your preference. You can set the language and other video and audio settings so when playback starts it will always use your preferred settings. Im rtant: 1. Load any disc into the unit before you can access the setup....

  • Page 17: Troubleshooting

    Symptom cause solution no power. Disc cannot be loaded or ejected. No sound. Sound skips. The operation keys do not work. The radio does not work. The radio station automatic selection does not work. The car ignition switch is not on. The fuse is blown. A cd is in the player disc is inserted upside ...

  • Page 18: Troubleshooting

    Problems during dvd playback cause the loaded disc has a different region number from this unit. Parental lock is on. The dvd playing does not feature multiple language recordings. You can only switch between items indicated in the disc menu. The dvd playing does not feature subtitles. You can only ...

  • Page 19: Dm800I

    Dm800i mp3-compatible am/fm dvd receiver instruction manual specifications cd/mp3/wma player section signal to noise ratio > 60 db channel separation > 50 db (1khz) frequency response 20hz - 20 khz tuner (fm) frequency range 87.5-107.9 mhz sensitivity 2.8 µv stereo separation 30 db signal to noise r...

  • Page 20: Dm800I

    Please read this instruction manual carefully before operating your unit. Dm800i instruction manual • dvd/mp3/am/fm/cd receiver • flip down/full detachable front panel • dvd/dvd-r/dvd-rw/svcd/vcd/mp4/mp3/wma/ cd-r/cd-rw compatible • sd/mmc card input • front usb/aux input • 3.2 inch tft-lcd display ...