M2 2M-1K2 Operating Instructions Manual - General Specifications
15
Model ...................................... 2M-1K2
Frequency Range ....................... 144-148 MHz
Power Out ................................. 1250 W PEP
Drive Input (Max Output) ........... 50 W
GENERAL SPECIFICATIONS
Modes ...................................... SSB, CW, JT65, FM AM
Duty Cycle in JT, FM or AM ......... 40% (45 sec. on, 75 sec. off)
Efficiency................................... 65-80%
Power Requirements:
DC .................................. 48-50
VDC @ 40 A
AC .................................. 180-264 VAC, 47-63 Hz, 15 A max (w/built in PS)
Spurious Emission ...................... >60 dB below mean power of fundamental frequency
Input/Output Connectors ............ Type “N” Female, Teflon® insulated
Preamp Relay Voltage (out) ........ 13.6 VDC @ .5 A
External Relay Control ................ N.O. contacts, rated @ 250 mA
Keying....................................... Key-to-Ground, RCA Jack. 10mA max current draw.
Protection.................................. Temp Controlled Fans (2)
................................................ SWR Shutdown (>2.5:1)
................................................ Over Temp Shut Down (> 90° C)
Operating Temps ....................... -20° to 40° C
Size (W/Power Supply) ............... 7.1 x 9.5 x 13.5 in (181 x 242 x 343 mm)
Weight (W/Power Supply)........... 20.5 lbs (9.3 kg)
Size (Amp Only)......................... 7.1 x 6.5 x 13.5 in (181 x 216 x 343 mm)
Weight (Amp Only) .................... 13.5 lbs (6.1 kg)
SPECIFICATIONS
ADDENDUM
ADDE
ND
U
M