1. DL manuals
  2. Mac Allister
  3. Chainsaw
  4. M-4545CSP
  5. Getting Started

Mac Allister M-4545CSP Getting Started

Summary of M-4545CSP

  • Page 1

    Original instructions_mnl_m-4545csp_gb_v03_1 11 107 m-4545csp 45cc petrol chain saw barcode: 5052931013852 mnl_m-4545csp_dft_gb_v4_111107.Indd 1 11/7/11 11:36:55 am supported by for all your warranty, parts and service needs 0845 601 4221 www.Servicelink.Org.Uk.

  • Page 2: Detail...

    Gb ie 02 45 46 60 61 43 25 33 20 in more detail... Product functions operation care and maintenance trouble shooting recycling and disposal technical and legal information guarantee ec declaration of conformity 19 03 03 15 18 getting started... Before you start quick start safety these instructions ...

  • Page 3: Started...

    M-4545csp by macallister getting started... Gb ie 03 before you start your product 20 1 11 10 9 8 7 6a 6 23 24 25 26 27 28 29 30 2 15 14 12 13 3 4 5 16 18 22 19 17 21 mnl_m-4545csp_dft_gb_v4_111107.Indd 3 11/7/11 11:36:56 am.

  • Page 4: Started...

    04 m-4545csp by macallister getting started... Gb ie your product before you start 31 32 33 34 1. Front handle 2. Front guard/chain brake 3. Saw chain 4. Guide bar 5. Sprocket nose 6. Tension screw a. Tension pin 7. Retaining nut 8. Cover 9. Primer 10. Rear guard 11. Rear handle 12. Fixing screw 13....

  • Page 5: Started...

    M-4545csp by macallister getting started... Gb ie 05 before you start pull the latches to open the cover (fig. 1, 2). > pull the front part downwards (fig. 3). > remove the product from the box (fig. 4). > fig. 1 fig. 2 fig. 3 fig. 4 unpack all parts and lay them on a flat, stable surface > remove a...

  • Page 6: Before You Start

    06 m-4545csp by macallister before you start getting started... Gb ie you will need warning! Although the product comes fully assembled it is essential to ensure it is free of any damage! Therefore carefully check the product before operation! Warning! Before removing, ensure the front guard/ chain ...

  • Page 7: Started...

    M-4545csp by macallister getting started... Gb ie 07 before you start remove the guide bar (4) and saw chain (3) from the drive > sprocket (22) and support pins (19) (fig. 6). Check the area under the cover (8), around the clutch (21), drive > sprocket (22) and support pins (19) and ensure that they...

  • Page 8: Started...

    08 m-4545csp by macallister getting started... Gb ie before you start assembly warning! The direction of the saw chain ‘cutters’ must be as indicated by the symbol and arrow on the guide bar! Slide the chain into the groove > around the guide bar (fig. 9). 5 fig. 9 make sure the chain is placed abov...

  • Page 9: Started...

    M-4545csp by macallister getting started... Gb ie 09 before you start note: fix the nuts finger tight only at this stage. The chain tension can not be adjusted with the retaining nuts tightened - they must be loosened first note: the saw chain (3) has not yet been tensioned. Tension the chain as des...

  • Page 10: Before You Start

    M-4545csp by macallister before you start getting started... Gb ie 10 assembly check the chain tension using one hand to lift the saw chain (3) > against the weight of the product. The correct chain tension is achieved when the saw chain can be lifted by approximately 2 - 4 mm from the guide bar (4)...

  • Page 11: Started...

    M-4545csp by macallister getting started... Gb ie before you start 11 this product is equipped with a 2-stroke engine, the fuel and oil tank are combined and it is essential to fill a fuel-oil mixture before operating this product. Observe the technical specific tions for suitable fuel and engine oi...

  • Page 12: Before You Start

    M-4545csp by macallister before you start getting started... Gb ie 12 fig. 19 always dispose of fuel, used oil and soiled objects according to > local regulations (see section “recycling and disposal”). Note: fuel and oil deteriorate over time. It may be difficult to start the engine if you use fuel...

  • Page 13: Started...

    M-4545csp by macallister getting started... Gb ie before you start 13 filling chain lubrication warning! The product is not filled with chain oil. It is essential to fill the product with chain oil before using it! Never operate the product without chain oil as this will result in extensive damage t...

  • Page 14: Before You Start

    M-4545csp by macallister before you start getting started... Gb ie 14 chain lubrication note: this product is equipped with an automatic oiling system! The oiling system automatically delivers the proper amount of oil to the bar and chain! Checking the lubrication requires starting the engine. Befor...

  • Page 15: Started...

    M-4545csp by macallister getting started... Gb ie 15 operating controls quick start front guard / chain brake choke knob primer throttle interlock throttle trigger ignition switch chain oil tank fuel tank oiler and adjustment screw for lubrication recoil starter handle mnl_m-4545csp_dft_gb_v4_111107...

  • Page 16: Quick Start

    M-4545csp by macallister quick start getting started... Gb ie 16 adjust add fuel add chain oil a a set up assemble cold start mnl_m-4545csp_dft_gb_v4_111107.Indd 16 11/7/11 11:37:06 am engage chain brake set ignition switch to “i” pull choke knob press primer x6 until fuel is visible pull recoil sta...

  • Page 17: Started...

    M-4545csp by macallister getting started... Gb ie quick start 17 a a release throttle lever and interlock set ignition switch to “o” empty tanks clean and maintain store warm start stopping warning! This quick start provides only a short overview of how to start and stop the product! For safe use it...

  • Page 18: Started...

    M-4545csp by macallister getting started... Gb ie safety 18 check that you have noted all the following instructions: before starting you must have fully read and understood the entire instruction manual. Working with this product is demanding; therefore ensure you are physically and mentally fit to...

  • Page 19: Detail...

    M-4545csp by macallister in more detail... Gb ie in more detail... 43 45 46 60 61 33 25 20 product functions operation care and maintenance trouble shooting recycling and disposal technical and legal information guarantee ec declaration of conformity mnl_m-4545csp_dft_gb_v4_111107.Indd 19 11/7/11 11...

  • Page 20: Detail...

    20 m-4545csp by macallister in more detail... Gb ie product functions intended use this petrol chain saw m-4545csp is designated with a maximum power output of 1.8 kw. The product is intended for cutting logs with a thickness of max. 425 mm with the guide bar provided. It must not be used for cuttin...

  • Page 21: Detail...

    21 m-4545csp by macallister in more detail... Gb ie product functions the chain brake is a safety mechanism activated by the front guard (2). When kickback occurs the chain stops immediately. A fig. 24 fig. 25 the chain brake (2) in the disengaged position, the product can be operated (fig. 24). The...

  • Page 22: Detail...

    22 m-4545csp by macallister in more detail... Gb ie product functions chain brake starting / stopping start the product as described, press the throttle interlock (25), > then fully squeeze in the throttle trigger (26) with your index finger and hold in this position activate the chain brake (2) whi...

  • Page 23: Detail...

    23 m-4545csp by macallister in more detail... Gb ie product functions mnl_m-4545csp_dft_gb_v4_111107.Indd 23 11/7/11 11:37:09 am note: when you squeeze the throttle interlock (26) and throttle trigger (27) the choke knob (25) will return to the operating position. Warning! Allow the rope to return s...

  • Page 24: Detail...

    24 m-4545csp by macallister in more detail... Gb ie product functions disengage the chain brake. > squeeze the throttle interlock and throttle trigger. The saw chain > runs. Push the front guard (2) to check if the chain brake works > properly. Then disengage the chain brake. Grip the product with b...

  • Page 25: Detail...

    25 m-4545csp by macallister in more detail... Gb ie operation general operation to become proficient attend a recognised chain saw training > course to learn how to operate chain saws safely and effectively. Familiarise yourself with all the controls and switches. Practise all movements with the pro...

  • Page 26: Detail...

    26 m-4545csp by macallister in more detail... Gb ie basic operating / cutting procedure operation the saw chain (3) must be > running at full speed before it makes contact with the wood. Use the spike bumper (18) to secure the product onto the wood before starting to cut and use it as a leverage poi...

  • Page 27: Detail...

    27 m-4545csp by macallister in more detail... Gb ie operation kickback kickback may occur if the nose or tip of the guide bar touches an object, or if wood pinches the saw chain in the cut. In some cases, contact with the tip of the guide bar (4) may cause a lightning-fast reverse reaction, kicking ...

  • Page 28: Detail...

    28 m-4545csp by macallister in more detail... Gb ie operation kickback with a basic understanding of ‘kickback’, the element of surprise > can be reduced or eliminated. Sudden surprise contributes to the majority of accidents. Keep a good firm grip on the product with both hands, your right > hand o...

  • Page 29: Detail...

    29 m-4545csp by macallister in more detail... Gb ie operation an escape path should be > planned and cleared as necessary before cuts are started. The escape path should extend back and diagonally to the rear of the expected line of fall (fig. 40). Before felling is started, consider > the natural l...

  • Page 30: Detail...

    30 m-4545csp by macallister in more detail... Gb ie operation limbing and pruning cutting spring poles limbing is removing the branches from a fallen tree. When limbing leave larger lower limbs to support the log off the ground. Remove the small limbs in one cut (fig. 42). Branches under tension sho...

  • Page 31: Detail...

    31 m-4545csp by macallister in more detail... Gb ie operation bucking a log bucking is cutting a log into lengths. It is important to make sure your footing is firm and your weight is evenly distributed on both feet. When possible, the log should be raised and supported by the use of limbs, logs or ...

  • Page 32: Detail...

    32 m-4545csp by macallister in more detail... Gb ie operation bucking a log support small logs on a sawing > stand or another log while bucking (fig. 47). Fig. 47 if the wood diameter is large > enough for you to insert a soft bucking wedge without touching the chain, you should use the wedge to hol...

  • Page 33: Detail...

    33 m-4545csp by macallister in more detail... Gb ie care and maintenance the golden rules for care clean the product with a slightly damp cloth and mild soap. Use > a brush for areas that are hard to reach. In particular clean the air vents (29) after every use with a cloth > and brush. Remove stubb...

  • Page 34: Detail...

    34 m-4545csp by macallister in more detail... Gb ie care and maintenance sprocket nose guide bar and saw chain maintenance note: it is not necessary to remove the saw chain (3) to lubricate the sprocket nose (5). Lubrication can be done on the job. Clean the sprocket nose (5). > using a disposable l...

  • Page 35: Your Product

    Your product 35 m-4545csp by macallister in more detail... Gb ie care and maintenance note: the condition of the oil passages can be easily checked. If the passages are clear, the chain will automatically give off a spray of oil within seconds of the product starting. Your product is equipped with a...

  • Page 36: Detail...

    36 m-4545csp by macallister in more detail... Gb ie care and maintenance saw chain sharpening note: never saw with a blunt chain. The saw chain is blunt if you have to push the product into the tree and the chips are very small. Have your chain (3) sharpened professionally at an authorised > service...

  • Page 37: Detail...

    37 m-4545csp by macallister in more detail... Gb ie care and maintenance inspect the air filter (14) regularly. Replace it with a new one if necessary. Loosen the fixing screw (12) and remove the air filter cover (13) > (figs. 53, 54). Remove the air filter (14) (fig. 55) and split it into its two >...

  • Page 38: Detail...

    38 m-4545csp by macallister in more detail... Gb ie care and maintenance fuel tank empty the fuel tank when storing the product over 30 days to > prevent the fuel from deteriorating. Unscrew and remove the fuel tank cap (28) and use a proper > fuel pump to empty the fuel into a suitable container. T...

  • Page 39: Detail...

    39 m-4545csp by macallister in more detail... Gb ie care and maintenance spark plug inspect the spark plug every 25 hours or prior to long-term > storage over 30 days if the use has not been this high. Clean or replace with a new spark plug if necessary. Remove the air filter cover (13) and air filt...

  • Page 40: Detail...

    40 m-4545csp by macallister in more detail... Gb ie care and maintenance carburettor the carburettor is pre-set by the manufacturer. Should it be necessary to make any changes please contact an authorised service centre or a similarly qualified person. Do not attempt to make any adjustments by yours...

  • Page 41: Detail...

    41 m-4545csp by macallister in more detail... Gb ie care and maintenance maintenance table part to do before/ after each use 10 hours 25 hours 50 hours / half year 100 hours / once a year cylinder fin clean x air filte clean x spark plug check x spark plug clean x spark plug replace whenever necessa...

  • Page 42: Detail...

    42 m-4545csp by macallister in more detail... Gb ie care and maintenance storage transportation clean the product as described above. > store the product and its accessories in a dry, frost-free, well- > ventilated place. Always store the product in a place that is inaccessible to children. > the id...

  • Page 43: Detail...

    43 m-4545csp by macallister in more detail... Gb ie trouble shooting trouble shooting suspected malfunctions are often due to causes that the users can fix themselves. Therefore check the product using this section. In most cases the problem can be solved quickly. Warning! Only perform the steps des...

  • Page 44: Detail...

    44 m-4545csp by macallister in more detail... Gb ie trouble shooting trouble shooting problem possible cause solution 1. Engine does not start 1.1 not enough fuel in fuel tank 1.2 primer has been not pressed at cold start 1.3 primer has been pressed at warm start 1.4 spark plug is wet 1.5 spark plug...

  • Page 45: Detail...

    45 m-4545csp by macallister in more detail... Gb ie recycling and disposal recycling and disposal waste products should not be disposed of with household > waste. Please recycle where facilities exist. Check with your local authority or local store for recycling advice. Petrol, oil, old oil, a mixtu...

  • Page 46: Detail...

    46 m-4545csp by macallister in more detail... Gb ie technical and legal information technical specifications general engine type > : 1e43f, 2 stroke petrol engine, air-cooled engine displacement > : 45.02 cm³ max. Speed > : 11000 min -1 recommended speed at idling > : 3200 min -1 recommended max. Sp...

  • Page 47: Detail...

    47 m-4545csp by macallister in more detail... Gb ie technical and legal information sound level according to en iso 3744, iso 22868 and 2000/14/ec sound pressure level l > pa : 102 db(a) sound power level l > wa : 111 db(a) uncertainty k > pa , k wa : 3 db(a) guaranteed power level l > wa : 114 db(a...

  • Page 48: Detail...

    48 m-4545csp by macallister in more detail... Gb ie technical and legal information on the product, the rating label and within these instructions you will find among others the following symbols and abbreviations. Familiarise yourself with them to reduce hazards like personal injuries and damage to...

  • Page 49: Detail...

    49 m-4545csp by macallister in more detail... Gb ie technical and legal information release to stop; location: above throttle lever on main handle chain brake disengaged/ engaged; location: on right side cover refill chain oil here; location: oil ca chain oil max min chain oil max min indication of ...

  • Page 50: Detail...

    50 m-4545csp by macallister in more detail... Gb ie the product complies with the applicable european directives and an evaluation method of conformity for these directives was done. Technical and legal information safety warnings this product is not intended for use by persons (including > children...

  • Page 51: Detail...

    51 m-4545csp by macallister in more detail... Gb ie technical and legal information do wear a face and breathing mask. The use of this product can > generate dust, mists and fumes containing chemicals known to cause respiratory damage. Do use safety steel toe capped footwear, sturdy cut retardant > ...

  • Page 52: Detail...

    52 m-4545csp by macallister in more detail... Gb ie technical and legal information safety warnings fuel handling fuel vapour pressure may build up inside the fuel tank depending > on the fuel used, weather conditions and the tank venting system. To reduce the risk of burns and other personal injuri...

  • Page 53: Detail...

    53 m-4545csp by macallister in more detail... Gb ie technical and legal information getting started do not operate the product indoors, it produces poisonous > exhaust fumes whilst the engine is running and may be colourless and odourless. Do not wrap the recoil starter rope around your hand whilst ...

  • Page 54: Detail...

    54 m-4545csp by macallister in more detail... Gb ie do not operate the product if you have any medical conditions > that might be aggravated by strenuous work. Check with your doctor before operating this product. Do not operate the product under the influence of drugs, alcohol > or medication. Do n...

  • Page 55: Detail...

    55 m-4545csp by macallister in more detail... Gb ie transport and storage do ensure the engine is off and engage the chain brake before > transporting the product. Do carry the product with the engine stopped, the guide bar and > saw chain to the rear, and the exhaust away from your body. Do use the...

  • Page 56: Detail...

    56 m-4545csp by macallister in more detail... Gb ie technical and legal information safety warnings always keep proper footing and operate the chain saw only > when standing on fixed, secure and level surface. Slippery or unstable surfaces such as ladders may cause a loss of balance or control of th...

  • Page 57: Detail...

    57 m-4545csp by macallister in more detail... Gb ie either of these reactions may cause you to lose control of the saw which could result in serious personal injury. Do not rely exclusively upon the safety devices built into your saw. As a chain saw user, you should take several steps to keep your c...

  • Page 58: Detail...

    58 m-4545csp by macallister in more detail... Gb ie technical and legal information safety warnings emergency familiarise yourself with the use of this product by means of this instruction manual. Memorise the safety directions and follow them to the letter. This will help to prevent risks and hazar...

  • Page 59: Detail...

    59 m-4545csp by macallister in more detail... Gb ie technical and legal information prolonged use of this product expose the operator to vibrations > and may produce ‘whitefinger’ disease. In order to reduce the risk, please wear gloves and keep your hands warm. If any of the ‘whitefinger’ symptoms ...

  • Page 60: Detail...

    60 m-4545csp by macallister in more detail... Gb ie guarantee guarantee this product has been manufactured to a high quality standard. > it is guaranteed against faulty materials and workmanship for 24 months from purchase, please retain your till receipt as proof of purchase. If the product is foun...

  • Page 61: Detail...

    61 m-4545csp by macallister in more detail... Gb ie ec declaration of conformity ec declaration of conformity we b&q plc. Chandlers ford, hants, so53 3le declare that the product 45cc petrol chain saw m-4545csp complies with the essential health and safety requirements of the following directives: e...

  • Page 62

    Gb-ie www.Diy.Com b&q plc. Chandlers ford, hants, so53 3le, united kingdom mnl_m-4545csp_dft_gb_v4_111107.Indd 62 11/7/11 11:37:22 am.