_____________________________________________________ operator’s manual for magbeast 5 drilling machine - 1 - safety instructions and operator ’s manual for drilling machine magbeast 5 jei solutions ltd unit 30 & 31 new hall hey business park new hall hey road, rawtenstall, rossendale, lancashire bb...
Magbeast 5 operator’s manual for magbeast 5 drilling machine - 2 - important safety instructions warning when using electric tools, basic safety precautions should always be followed to reduce risk of fire, electric shock and personal injury. Read and save all instructions for future reference befor...
Magbeast 5 operator’s manual for magbeast 5 drilling machine - 3 - 17. Outdoor use extension cords when tool is used outdoors, use only extension cords intended for use outdoors and so marked. 18. Stay alert (do not use when taking medications that may cause drowsiness.) watch what you are doing. Us...
_____________________________________________________ operator’s manual for magbeast 5 drilling machine - 1 - specifictions maximum hole cutting capacity diameter Ø200mm maximum tapping capacity diameter m52 spindle bore morse taper 5 speed 4 gear - variable 28 - 450 rpm motor single phase 230v - 25...
_____________________________________________________ operator’s manual for magbeast 5 drilling machine - 1 - eyebolt for easy lifting and handling of the machine lifting handle for easy handling and moving of the machine motor 3000w capstan arm with large gear ratio. Fast attach conection for both ...
_____________________________________________________ operator’s manual for magbeast 5 drilling machine - 1 - stopping & starting the machine variable speed control.
Magbeast 5 operator’s manual for magbeast 5 drilling machine - 2 - use of cutting fluid magbeast 5 has 5 morse taper spindle drilling. To be used with metal cutters, there is a necessity to use a 1.1/4’’ adapter. For this use the 1 1 / 4 ”weldon shank is the most common. This shank has a dimension o...
Magbeast 5 operator’s manual for magbeast 5 drilling machine - 3 - adjustment of slide tips for keeping your machine in correct working order in order to ‘get the best life’ out of your magnetic drill machine, always keep in good working order. A well maintained machine is a happy machine. A number ...
Magbeast 5 operator’s manual for magbeast 5 drilling machine - 4 - visually check the machine for damage. Machine must be checked before operation for any signs of damage that will affect the operation of the machine. Particular notice must be taken of the mains cable, if the machine appears to be d...
Magbeast 5 operator’s manual for magbeast 5 drilling machine - 5 - solutions for drilling problems.
Magbeast 5 operator’s manual for magbeast 5 drilling machine - 6 - neither magnet or motor is working the magnetic switch is not powered damaged or defective wiring damaged or defective fuse faulty magnetic switch defective control box faulty power supply magnet is active, but motor does not turn da...
Magbeast 5 operator’s manual for magbeast 5 drilling machine - 7 - the motor scores, brush fires and little or no power damaged armature damaged field damaged or worn brushes the motor does not start or stop damaged or defective wiring contaminated reader defective or loose magnet in reader for spee...
Magbeast 5 operator’s manual for magbeast 5 drilling machine - 8 - magbeast 5 parts diagram magbeast 5 parts diagram.
Magbeast 5 operator’s manual for magbeast 5 drilling machine - 9 - parts breakdown.
Magbeast 5 operator’s manual for magbeast 5 drilling machine - 10 -.
Magbeast 5 operator’s manual for magbeast 5 drilling machine - 11 -.
Magbeast 5 operator’s manual for magbeast 5 drilling machine - 12 - jei six (6) month limited warranty jei solutions warrants the magbeast 5 drilling machine to be free of defects in material and workmanship under normal use for a period of six months from date of purchase. This warranty does not co...
