Magicar M100AS User Manual - page 17
34
Set-up and Other Functions
Set-up and Other Functions
33
Time information backup
1. It saves time information (current time, start-up reservation time and alarm tim e)
in the status where power has not been supplied to remote (at a time of replacing
batteries). If t he power is supplied again, users do not have to re-adjust the time
information.
2. Rem ot e default is set in the status when the time information backup is released.
In order to set up the time i nform ation backup for the remote, users need to execute
the menu of the remote once or m ore.
Aft er users execute the menu ((2+3)-), the time inform ation backup is aut om atically
executed.
3. Cauti ons at a time of replacement of batteries
In order to use the time information backup function more effectively, press button
No.4 of the remote before and at a time of the replacement of the bat teries (commu-
nication with the main not needed at that time) to back up more accurate time infor-
mation.
Door Open Indicating Function
The parking lights wil l flash t o indicate that the door is open.
(See page 39 - for the set-up procedure for the main opt ions)
GAS(LPG) Option Set-up
※
Bu rning of f gas residue in the sy st em:
▶
In Turbo Mode, if Key is turned OFF but the GAS valve is not shut off, then
the engine will be turned off i n 4 minutes without burning off the gas
residue.
▶
In Turbo Mode, the remote will show the engine running to burn off the gas
residue.
Note
Auto Transmission Car
- While engine is running, shut off the gas valve and wai t. Then turn off the key after
the gas residue was burnt off.
- Activating Turbo Mode will be a convenient way of burning off the gas residue
since engine will continue runni ng like a manual transmission vehicle unti l the gas
residue is burnt off. See below.
Manual Transmission Vehicle
Turn off the key first then shut off the gas valve. Engi ne wil l continue running until
the gas resi due is burnt off. If you open and cl ose the door while engine is still run
ning, t he remote start reservat ion is also completed.
Remote Start
After remote start is completed, the ignition wire will continue to be powered for 4
more minutes (or 4 minute and 20 seconds if a door opens while engine is running)
by the system to make sure the gas residue is burnt out.