Magicar M100AS User Manual - page 6
Button Functions
3. RPS Car Call Display
When disarming, if the RPS was triggered while the system was armed, the
numbers of times it was triggered will be displayed.
4. Function of Shock Alarm
When disarming, if the Shock Sensor was triggered while the system was armed,
the numbers of times it was triggered will be displayed.
12
11
Button Functions
Unlocking/Disarming the vehicle and alarm.
If the system is locked/armed, pressing button I for a half second will unlock the
doors and disarm the alarm. This function will still operate even while the vehicle
is remote started. The remote and vehicle will chirp twice.
♬♪~Beeps two, four times
1. Disarming
●
The door(s) will be unlocked the RPS LED wil l stop flashing, and the following
details will be indicated according t o t he number of chirps and parking li ght
f l a s h e s :
Twice: No trouble while the system was armed.
Four tim es: Alarm was triggered by strong i mpact or a opened door.
2. Auto Rearm
●
If a door has not been opened within 30 sec. of disarming the alarm, the doors
will be relocked and the alarm will arm. This feature is meant to protect against
an accidental disarm of the system. To prevent the rearm process, simply open
a door within 30 sec. of disarming the alarm. The system will not arm again
until given the command through the remote.
Flashes 5 times
▶
In the alarm has been triggered, press button I. The siren will stop, but the
alarm will still be armed. The system will not respond for the first few
seconds after the alarm was triggered, this is because it is still trying to
send a signal out to the remote during that time.
▶
Press button I again to disarm the alarm.
Note