Main Access In-Pool Ladder Assembly Instructions

Download

Print this page

Bookmark us

Ladder Components

Qty

A) In-Pool Ladder Body

B) Handrails

C) Deck Flange

Hardware Kit

Qty

D) #10 x 3/4” Tek Screw

E) #10 x 1” Panhead Screw

Tools Required:

Phillips and standard

screwdriver or bit, drill, 1-1/2” hole saw, pencil.

Note:

Handrails should be mounted through the

deck boards for proper installation.

Note:

Before you begin the assembly of your

ladder/step, please insure you have all components

and hardware.

Note:

Contact our customer service department to

request any missing or damaged parts, hardware or

labels at 888-333-1134.

SAFETY INSTRUCTIONS:

• Install ladder per manufacturer’s instructions.

• Locate IN-POOL LADDER on solid base.

• Ladder is designed for use by one person at a time.

• This ladder is intended for use as a swimming pool ladder only.

• Face ladder when entering and exiting the pool.

• No jumping, no diving from ladder.

• Do not swim through, behind or around the ladder.

For models #200200 Easy Incline and #200300 Pro Series

Step 1 Handrail Assembly

Secure aluminum handrails (B) to the ladder body (A), the

shorter end of the handrail at the ladder body and the longer

end through the deck.

NOTE:

Be sure to fully insert the handrail

into the ladder socket and secure with one

set screw #10 x 3/4” Tek Screw (D). Screw

should be secured through outside of each

ladder socket into the handrail to act as

a set screw to secure the handrail to the

ladder body.

Step 2 Ladder Position

Locate the final desired position of the in-pool ladder. Insure

the ladder bottom will rest flat and level on the bottom of

the pool. Position the handrails on the deck and mark their

final desired position with a pencil and set them aside. Using

the 1-1/2” hole saw, drill two holes through the deck boards

that will now support the in-pool ladder.

1004 Jaycox Road • Avon, Ohio 44011

888-333-1134

IN-POOL LADDER

ASSEMBLY INSTRUCTIONS

Step 3 Secure Handrails to Deck

Place the deck flanges (C) around each handrail on the deck

side and insert the handrails through the holes in the deck

until the ladder rests flat and level on the bottom of the pool.

Secure each deck flange to the deck with three (3) #10 x 1”

Panhead Screws (E). Also secure the

handrail to each deck flange by once again

using one (1) #10 x 3/4” Tek Screw (D)

to act as a set screw to secure the handrail

into the final desired position.

NOTE:

Up to four standard patio pavers or bricks can be

inserted in the bottom tread for additional ballast. Be sure to

shim the pavers or bricks firmly in place.

S T E P B Y S T E P A S S E M B LY I N S T R U C T I O N S