Main Resource Isoetec EZ-1 Manual
www.MainResource.com
800 362-6740
Your source for Refurbished Isoetec Equipment
1 of 7
Isoetec EZ-1 Telephone System
Station Manual
Testing Your Telephone
To test the keys and lights on your phone, perform the following steps:
•
Pick up your handset, wait for dial tone
•
Dial “80”
•
Press each programmable key. Each key should light as you press it.
•
Press each key on the dial pad. Each key should light one of the programmable keys
when you press it.
•
Press each of the bottom keys (HOLD, TRAN/CON, etc.). Each key should light as
you press it. The volume up key will light the “HOLD” key. The volume down key
will light the “TRAN/CON” key.
Programming Your Telephone
The following features may be programmed from your telephone:
•
Direct Station Selection
•
Station Speed Dial
Direct Station Selection
To assign a DSS/BLF key for single-key direct access to a desired extension:
•
Press the “PROGRAM” key.
•
Press the key you wish to program
•
Dial the extension number to assign to the key.
•
Remember to label your key with the newly programmed extension number or key.