12513 loma rica dr., grass valley, ca 95945 phone: (530) 272-8786 / fax: (530) 272-1638 email: info@modulinesystems.Com web: www.Modulinesystems.Com moduline systems\manuals\model a ver 2/20/13 reliable liquid dispensing at an affordable price model a dispenser operation manual.
I reliable liquid dispensing at an affordable price table of contents contents page introduction 1 initial setup – installing & adjusting syringe 1 final setup for use as a handheld dispenser 1 final setup for use as an automated dispenser 2 using the system 2 clean up 2 figures (1) model a dispense...
1 reliable liquid dispensing at an affordable price introduction the moduline systems model a dispenser is an analog syringe pump designed for precision hand and automated microplate dispensing. The model a will be shipped in 1 – 2 boxes depending on what accessories are ordered with it. Open boxes ...
2 reliable liquid dispensing at an affordable price 2. Connect the inlet fluid line to the syringe’s inlet (bottom) port. 3. Connect the fluid inlet line of the hand control to the syringe’s outlet (top) port. 4. For single vial or tube filling, install the luer mounted plastic tip to the mated fitt...
3 reliable liquid dispensing at an affordable price 3. Hold down the hand control dispense button or initiate a prime cycle by moving the prime switch to the down position until all reagent has been removed from the system. 4. After the system is empty, it should be flushed with an appropriate clean...
4 reliable liquid dispensing at an affordable price.
5 reliable liquid dispensing at an affordable price.
6 reliable liquid dispensing at an affordable price.
7 reliable liquid dispensing at an affordable price model a – specifications pump type positive displacement single-channel syringe pump precision cv syringe manifold configuration ≤ 3% 2 ml syringe with 8 port manifold operating parameters standard syringe sizes 2.0 ml 5.0 ml resolution 100 µl 250 ...
