N-Com B1 User Instructions

Other manuals for B1: User Instructions And Safety

Summary of B1

  • Page 1

    Firmware version: 1.Xx v.04 en user instructions and safety.

  • Page 2

    Congratulations on your purchase of an n-com product. N-com b1 was made using the most advanced technologies and the best materials. Long-running tests and thorough system development have allowed the highest audio quality to be achieved. For additional information about b1, and to download high- de...

  • Page 3

    B1 3 contents 1. Warnings and safety ...................................................... 4 1.1.Road safety.......................................................................... 4 1.2.Switching on the system in safe environments ........................... 4 1.3.Interferences ....................

  • Page 4

    4 1. Warnings and safety read this user manual carefully, as well as the user manuals for other n-com kits that you will be using with the n-com b1. Read the simple rules listed below. Failure to comply with these rules may lead to dangerous situations. Caution: the product cannot be used in officia...

  • Page 5

    B1 5 caution: adjust the volume of the n-com system (where provided) and of the audio sources connected to it before you use the system on the road. Caution: adjusting the volume to very high levels may cause damage to your hearing. Caution: adjust the volume of the n-com system (where provided) and...

  • Page 6

    6 1.7. Disposal refer to this user manual and to manuals related to other parts of the n-com system in order to disassemble the system from the helmet. Once the system has been disassembled, dispose of it according to the following instructions: the presence of a crossed-out wheelie bin indicates th...

  • Page 7

    B1 7 3. Installation you can download the installation video from www.N-com.It n-com / download section. Fig. 1 open the small door on the e-box and place the rechargeable battery inside the system, making sure it is inserted in the right direction (fig.1) before you install the b1 system on the hel...

  • Page 8

    8 prior to installing the n-com system, remove any filling foam material found in the helmet. Option 1: remove the bottom element in foam material and the filling materials in the housings of the n-com earpieces located in the eps cheek pads. Option 2: remove the left and right side filling material...

  • Page 9

    B1 9 fig. 5 fix the cable inside the helmet and make sure the right fixing clip snaps into its housing (fig. 5) fig. 6 position the microphone in the housing on the left of the helmet, inserting the metal boom in the groove found in the chin guard coupling frame (fig. 6). Caution: make sure that the...

  • Page 10

    10 3.1. Removing the b1 system from the helmet proceed as follows to remove the b1 system from the helmet: remove the cheek padding and the shell gasket; fig. 8 remove the keypad from the shell, using a flat head screwdriver (or a similar tool) to lever upwards in the special hollow as shown in fig....

  • Page 11

    B1 11 4. Basic functions all n-com system functions are available through the operation of three pushbuttons: “”, “on” and “ ”. Every time the system is given a command, a special acoustic signal can be heard, which varies depending on the function being requested. This way, all the functions can ...

  • Page 12

    12 5. Pairing up bluetooth devices in order for the b1 system to be connected to another bluetooth device, the latter needs to be first paired up with the n-com system. The pairing up procedure is the same for all bluetooth devices: mobile phones, mp3 bluetooth players, satellite navigators, etc. 1....

  • Page 13

    B1 13 6. Mobile phone functions answering a phone call briefly press any key when you hear the incoming call signal hanging up/rejecting a phone call press “on” and keep it pressed for about 2 seconds (until you hear the acoustic signal) voice call (if equipped) press “on” and keep it pressed for ab...

  • Page 14

    14 8. Bluetooth a2dp music player you can listen to high quality music by connecting b1 to a device equipped with bluetooth a2dp (advanced audio distribution profile) protocol. The b1 system is also equipped with bluetooth avrcp (audio video remote control profile) protocol, which allows you to stop...

  • Page 15

    B1 15 10.2. Intercom function to activate the intercom connection, turn on the two n-com systems and briefly press “on” on one of the helmets. Intercom activation with b1 turned on, briefly press “on”. Intercom deactivation with b1 turned on, briefly press “on”. 11. Battery before using the n-com de...

  • Page 16

    16 12. Summary table of controls button on on pressure brief long brief long brief long brief long turning on x (3s) turning off x (4s) increase volume x decrease volume x activate / deactivate audio via cable x (2s) activate intercom x b a s ic f u n c ti o n s deactivate intercom x answer phone ca...

  • Page 17

    B1 17 13. Limited warranty with this limited warranty certificate, nolangroup warrants this product to be free from defects in material and workmanship at the time of its original purchase by the buyer. We invite you to: - read the cautions pertaining to safety and proper use. - read the warranty te...

  • Page 18

    18 product purchase date. Buyer’s name and address. Nolangroup reserves itself the right to not carry out repairs under warranty if the aforementioned information is removed or modified after the original purchase of the product from the dealer. 13.4. Procedure for the forwarding of claims to forwar...

  • Page 19

    14. Warranty registration form product name: b1 identification code buyer’s information name last name address phone e-mail dealer’s stamp date of purchase.

  • Page 20

    Printed on recycled paper b1v04 - 26/03/2015 17:31:00