- DL manuals
- NANO CAM
- Dash Cameras
- NCP-DVRGPS
- User Manual
NANO CAM NCP-DVRGPS User Manual
Summary of NCP-DVRGPS
Page 1
User manual full hd dash cam dvr with gps logger ncp-dvrgps.
Page 2
Caution ....................................................................................................................................................................... 5 battery warning .............................................................................................................
Page 3
3 2.8.4 exposure............................................................................................................................................... 13 2.8.5 motion detection .....................................................................................................................
Page 4
4 3.4 playback menu ................................................................................................................................................. 27 3.4.1 deleting photos & videos .......................................................................................................
Page 5
5 caution • ensure you are using your car dvr within your countries’ road laws. Please make sure you are familiar with your local road legislation before use. • avoid leaving your car dvr in direct sunlight for extended periods of time in an unventilated space. • please set time and date before you ...
Page 6
6 1. Introduction thank you for purchasing a nanocam plus car dvr. Please read through these instructions before attempting to install this product. For the latest manual updates, please see www.Nanocamplus.Com.Au or www.Nanocamplus.Co.Nz . 1.1 features • recording full high definition 1080p footage...
Page 7
7 2. Getting started 2.1 inserting memory card with the car dvr turned off and the screen facing towards you insert the memory card with the text on the micro sd card facing toward you. Push the memory card in until a click is heard. Note: 1. Do not remove or insert the memory card while the car dvr...
Page 8
8 2.3 led indicator status explanation led indicator colour battery charging solid red light power on, battery fully charged solid blue light power on, recording flashing blue light 2.4 powering the car dvr on / off 2.4.1 auto power on/off when the car dvr is correctly installed and connected to you...
Page 9
9 2.6.1 formatting the inserted micro sd card formatting the micro sd card will delete all information on the inserted micro sd card and prepare the card for use with the car dvr. 1. Press the ok button to stop the car dvr from recording. 2. Press the m button to enter the video menu . 3. Press the ...
Page 10
10 2.7 using the car dvr 2.7.1 recording video when the car dvr is connected to your vehicle's 12v power supply, the car dvr will automatically power up and begin recording when you start your vehicle. During the start up the buttons will be unresponsive and the camera will take a moment to begin re...
Page 11
11 number icon item description 5 exposure shows the current exposure setting 6 microphone shows if the microphone is muted or recording 7 wide dynamic range the wdr icon will appear when the wide dynamic range setting is active 8 day/night mode will show a sun or moon icon indicating if the lcd lig...
Page 12
2.8.2 loop recording loop recording allows you to set the duration that the camera will record before creating a new clip. To set the clip length please follow the instructions below. 1. Press the ok button to stop the car dvr from recording. 2. Press the m button to enter the video menu. 3. Use the...
Page 13
2.8.4 exposure exposure is used to manually control the light sensitivity settings. To change the exposure setting follow the instructions below. 1. Press the ok button to stop the car dvr from recording. 2. Press the m button to enter the video menu. 3. Use the and > buttons to navigate the video m...
Page 14
14 2.8.6 recording audio the recording audio setting allows you to mute the microphone during recording, or set it to record. To set your recording preferences, please follow the instructions below. 1. Press the ok button to stop the car dvr from recording. 2. Press the m button to enter the video m...
Page 15
15 2.8.8 g sensor (gravity sensing) the g sensor defines the required force needed to trigger emergency recording. Once emergency recording is triggered the current recording will be saved and protected from being saved over by the normal loop recording. To set the required sensitivity please follow...
Page 16
16 3. Photo mode this screen is used to capture still images using your car dvr. To access the photo screen ensure that the camera is not recording and hold the m (menu/mode) button for 3 seconds. Photo mode also has a menu which is used to edit the photo settings. This menu can be accessed by press...
Page 17
17 3.1.3 sequence when sequence is activated, when a photo is triggered a sequence of 3 photos is taken. To activate or deactivate sequence mode, follow the instructions below 1. Enter the photo screen. 2. Press the m button to enter the photo menu . 3. Use the and > buttons to navigate the photo me...
Page 18
18 3.1.5 sharpness sharpness sets the boldness of the image. Images with a stronger sharpness will create bolder images with stronger outlines. To change the photo sharpness, please follow the instructions below. 1. Enter the photo screen. 2. Press the m button to enter the photo menu . 3. Use the a...
Page 19
19 3.1.7 colour the colour setting is used to set the colour palette. To change the colour setting follow the instructions below. 1. Enter the photo screen. 2. Press the m button to enter the photo menu . 3. Use the and > buttons to navigate the photo menu and highlight the colour setting and press ...
Page 20
20 3.1.9 exposure exposure is used to manually control the light settings. To change the exposure setting follow the instructions below 1. Enter the photo screen. 2. Press the m button to enter the photo menu . 3. Use the and > buttons to navigate the photo menu and highlight the iso setting and pre...
Page 21
21 3.1.2.1 quick review quick review displays the photo on screen for the set amount of time after the photo has been taken. To change the quick review setting follow the instructions below. 1. Enter the photo screen. 2. Press the m button to enter the photo menu . 3. Use the and > buttons to naviga...
Page 22
22 3.2 setting menu this menu is used to edit the cameras operational settings. This menu can be accessed through either the video or photo menu by pressing the m whilst in either of these menus. While in this menu the and > buttons are used to navigate and the ok button to select the highlighted se...
Page 23
23 3.2.3 beep sound the beep sound setting is used to turn off or on the beep that indicates a key press. To adjust the key beep settings, follow the instructions below. 1. Ensure that the dvr is not recording. 2. Press the m button to enter the video or photo menu . 3. Press the m button again to e...
Page 24
24 3.2.5 frequency the frequency setting is used to set the cameras frequency. To adjust the frequency, follow the instructions below. 1. Ensure that the dvr is not recording. 2. Press the m button to enter the video or photo menu . 3. Press the m button again to enter the settings menu . 4. Use the...
Page 25
25 3.2.7 format the format setting is used to format the inserted micro sd card. This optimises the micro sd for the ncp-dvrgps and deletes all data from the inserted micro sd card. It is recommended that you format your micro sd card before attempting to use the ncp-dvrgps. To format an inserted mi...
Page 26
26 3.2.9 delayed shutdown the delayed shutdown setting is used to set how long the camera will continue recording after you power off our vehicle. To adjust the delayed shutdown setting, follow the instructions below. 1. Ensure that the dvr is not recording. 2. Press the m button to enter the video ...
Page 27
27 3.3 playback screen this screen is used to playback photos and videos. To access the playback screen ensure that the camera is not recording and hold the m (menu/mode) button for 3 seconds. This will send the camera to the photo screen. While in the photo screen hold the (menu/mode) button for an...
Page 28
28 3.4.2 locking and unlocking photos and videos to lock or unlock photos or videos from being deleted, please follow the instructions below. 1. Navigate to the playback screen using the instructions in the section labelled playback screen 2. In the playback screen use the and > buttons to select th...
Page 29
29 3.5 playing videos and viewing pictures / gps data playback your videos can be viewed in most playback programmes like windows media player and quicktime. However, to playback your footage alongside the recorded gps tracking and speed details please use the included driving recorder player softwa...
Page 30
30 v ideo resolution 1080fhd 1920x1080 720p 1280x720 wvga 848x480 vga 640x480 loop recording off 2 minutes 3 minutes 5 minutes wdr off on exposure +2.0 -1/3 +5/3 -2/3 +4/3 -1.0 +1.0 -4/3 +2/3 -5/3 +1/3 -2.0 +0.0 motion detection off on recording audio off on date stamp off on g sensor (gravity sensi...
Page 31
31 settings date / time set date and time auto power off off 1 minute 3 minutes 5 minutes beep sound off on language language select tv mode ntsc pal frequency 50hz 60hz lamp setting off on format internal memory sd card screen saver off 30 seconds 1 minute 2 minutes 5 minutes delayed shut- down off...
Page 32
32.
Page 33
33 warranty terms & conditions our goods come with guarantees that cannot be excluded under the australian & new zealand consumer law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to ha...
Page 34
Www.Nanocamplus.Com.Au www.Nanocamplus.Co.Nz © nanocam plus 2016.