Narco Avionics MK 12D PLUS TSO NAV/COM Addendum Installation Manual

Summary of MK 12D PLUS TSO NAV/COM

  • Page 1

    Printed in the u.S.A. August 1999 narco avionics mk 12d+ tso nav/com addendum installation manual 03118-0620p narco avionics inc. 270 commerce dr., fort washington pa 19034 (215)-643-2900 fax (215)-643-2498 www.Narco-avionics.Com.

  • Page 3

    Installation manual addendum 8/99 1 1.0 introduction 1.1 features the mkl2d+ is an upgraded version of the mk12d. It has a number of new improved features. * internal active and standby frequency keep-alive * digital vor (dvor) * com frequency presets - 10 channels * com active or standby frequency ...

  • Page 4

    Narco avionics mk12d+ 2 8/99 item order number description accessory part no. 1 2 3 4 5 6 7 8 03118-0317 03118-0318 03118-0319 03118-0320 03118-0321 03118-0322 03118-0323 03118-0324 mk-12d+ 14v (without gs) with: tray installation kit mk-l2d+ 14v (with gs) with: tray installation kit mk-l2d+ 28v (wi...

  • Page 5

    Installation manual addendum 8/99 3 2.3 product specifications note: refer to paragraph 2.3 in the mk12d manual. Please note that the mki2d and the mkl2d+ now have 760 com channels and tune to 136.975 mhz. The digital vor accuracy is ± 1 ° . 2.4 post installation tests refer to paragraph 2.10 in the...

  • Page 6

    Narco avionics mk12d+ 4 8/99 com: mhz/khz and channel select knobs both these controls allow for continuous cw or ccw rotation. Mhz frequency readout, in active or standby display, changes at a rate of 1 mhz per detent. Rotation of the khz knob steps the standby frequency readout at a change rate of...

  • Page 7

    Installation manual addendum 8/99 5 2.5.2 nav section operation nav: display the left side of the display identifies the nav active frequency. The right side of the display identifies the nav standby frequency or radial from the station. The standby frequency will momentarily be displayed upon turn ...

  • Page 8

    Narco avionics mk12d+ 6 8/99 2.6 mechanical installation this section provides the mechanical installation steps for mounting the tray and rear connector. 2.6.1 tray lock the tray has a built-in spring locking device. When the unit is positioned into the tray's track and slid into the tray the tensi...