National Cycle N925 Owner's Manual
PARTS LIST
INSTALLATION AND OWNER’S MANUAL
Light Bar N925 for Installation to:
Kawasaki
®
VN1500D&E and VN800B Pages 1,2,3 and 5
Kawasaki
®
VN1600 Pages 1, 4 and 5
QTY. PART
NO.
DESCRIPTION
1
N925
Light Bar Assembly
Bag 154
6
80-850000-000
Scotchlok Connectors
2 49-490521-000
Washer
Flat
(for VN1600 only)
2
50-571100-000
Screw, M6 x 16 (for VN1600 only)
Tools needed to remove fuel tank.
Screw Driver, #2 Phillips
Socket 10mm and Ratchet Wrench
Socket 27mm, 3” Extension and Wrench
Hex Key Wrench, 5mm
Slip Joint Pliers
Floor Jack capable of lifting front of motorcycle.
Motorcycle Owner’s Manual
Screw Driver, #2 Phillips
Screw Driver, Flat Blade
8mm Wrench
Slip Joint Pliers
Motorcycle Owner’s Manual
Page 1 of 5 10-110725-000 06/03
PREPARATION VN1500D and VN800B
PREPARATION VN1600
Make certain the motorcycle is positioned securely on
its sidestand or a work stand.Cover the front fender
to avoid scratches due to a dropped part or tool.
Make certain the motorcycle is positioned securely
on its sidestand or a work stand.Cover the front
fender to avoid scratches due to a dropped part or
tool.
2. Remove the head lamp from the Headlight Shell
(Screwdriver), set aside.
3. Disconnect Turnsignal Wires Inside headlight Shell.
4. Remove Turnsignals: (Refer to the motorcycle owner’s
manual)
REPLACEMENT PARTS and ACCESSORIES
Order parts through your local dealer or contact National Cycle.
N925
Description
Part No.
Light Head Assembly
90-910501-000
Lamp Assembly E13/DOT
Reflector, Lens and Bulb
90-901011-000
Halogen H3 Bulb
90-901015-000
Turn Signal
Assembly
90-930921-000
Turn Signal Lens
90-930213-000
Turn Signal Bulb Only: Bulb 1157 Available at Most Auto Parts Stores.
Light Bar Accessories
Chrome Visor
N9005
Alternate Thumb Switch
N9001
TOOL LIST VN1600 Installation
TOOL LIST VN1500D&E and VN800B Installation
Tips for facilitation of operation, control
and adjustment, as well as maintenance
work.
Special notes and cautionary measures
which can prevent damage to the motor-
cycle.
Left and Right side of motorcycle is determined
while sitting on the bike.