Congratulations on owning your new nautica watch developed from advanced electronics technology, the movement is manufactured from the best quality components and powered by a long life battery. Index page watch information and care 2 - 5 operating instructions basic models 6 - 7 date models 8 - 9 m...
2 3 2 3 nautica watches have been developed with the highest attention to quality, function and detail, as befits the nautica tradition. Please read the following instructions carefully to fully understand all of the functions of your finely crafted timepiece. Water-resistance if your watch is water...
Screw-in setting crown some deep-depth water-resistant watches require the setting crown to be screwed in to ensure water-resistancy. If your nautica watch has a transparent sticker at back of the case back (diagram above) please unscrew the crown before setting your watch, and the crown must be scr...
6 7 crown position a b crown position a b basic models y121, 2039, 2036, 608/1010 vx10 / vx51 / yl60 / 4s20 336/168 crown position a b time to set the time: 1. Pull crown to “b” position. 2. Turn crown clockwise /counter clockwise to correct time. 3. Push crown to “a” position..
8 9 8 date models crown position date a b c vx33 crown position day date a b c vx12 / vx42 / vx32 / vx82 / 2315 / 2115 / 2415 / al32 time to set the time: 1. Pull out crown to “c” position. 2. Turn crown clockwise / counter clockwise to correct time. 3. Push in crown to “a” position. Calendar to set...
10 11 24 hour crown position a b c vx3r date date 24 hour vx3j crown position a b c day day day date 24 hour crown position a b c vx3l 24 hour day crown position a b c vx3n / vx7n date day crown position a b c vd79 date vx36 crown position a b c date multi models time to set the time: 1. Pull crown ...
12 13 6p27 day date 24 hour crown position 6p23 date 24 hour 24 hour a b c crown position crown position 6p29 day a b c date time to set the time: 1. Pull crown to “c” position. 2. Turn crown either way to correct time. 3. Push crown to “a” position. Date to set the date : 1. Pull crown to “b” posit...
14 15 to activate the indiglo: press crown to indicate indiglo night light. Time to set the time: 1. Pull crown to "c" position. 2. Turn crown clockwise / counter clockwise to correct time. 3. Push crown to "a" position. Crown position date a b c m905 indiglo models calendar to set the date: 1. Pull...
16 17 stopwatch minutes hand stopwatch hour hand small second hand pusher “a” stopwatch 1/20sec. Hand stopwatch second hand ym92 crown position a b c pusher “a” pusher “b” ym91 stopwatch minute hand second hand chronograph hand 1/5 second chronograph models this chronograph watch has three functions...
18 19 before using the stopwatch, reset the stopwatch hands. To the “12” and “0” position. Standard stopwatch measurement: 1. Press pusher “a” to start timing. 2. Press pusher “a” to stop timing. 3. Press pusher “b” to reset. Accumulated elapsed time measurement: 1. Press pusher “a” to start timing....
20 21 5. Press pusher “b” repeatedly to set stopwatch second hand to “0” position. 6. Push crown to position “a”. Remarks: this is suggested to check the hour and minute hands to ensure they are correct before pushing the crown back to position “a” to adjust stopwatch hand (for ym92) : 1. Pull crown...
22 23 a b c crown position pusher “b” pusher “a” second hand hour hand 24-hour hand calender fs00 / fs01 stopwatch munute hand stopwatch second hand minute hand a b c crown position pusher “b” pusher “a” second hand hour hand 24-hour hand calender fs20 / fs21 stopwatch munute hand stopwatch second h...
24 correcting stopwatch hands if after resetting the stopwatch hands it is found that they are not at the '12' or '0' position, correct them as follows: 1. Pull crown to “ c” position. 2. Press pusher “a” continuously, the stopwatch hand will advance rapidly until it gets close to the “ 12” position...
26 27 a b c crown position pusher “b” pusher “a” 5030d date minute chrono hand hour chrono hand permanent second hand stopwatch second hand a b c crown position pusher “b” pusher “a” 5040b date minute chrono hand 1/10 second counter hand (hour counter hand after 30 minutes) permanent second hand sto...
28 29 before using the stopwatch, reset stopwatch chrono hands to the “12” and “0” position. Standard stopwatch measurement 1. Press pusher “a” to start timing. 2. Press pusher “a” again to stop timing. 3. Press pusher “b” to reset. Accumulated elapsed time measurement 1. Press pusher “a” to start t...
30 31 after finishing the big sec. Stopwatch hand adjustment, press crown back to position “a” to terminate the adjustment. To adjust the 1/10 second count hand (for 5040b) after activating the corrective mode, if the 1/10 second counter hand is not located at '12' or '0' position, press pusher “b” ...
32 33 a b c crown position pusher “b” pusher “a” date stopwatch minute hand 24 hour hand stopwatch second hand a b c crown position pusher “b” os2b date stopwatch minute disk second hand stopwatch second hand os11 minutes hand permanent second hand a b c crown position stopwatch second hand pusher “...
34 35 correcting stopwatch hand if after resetting the stopwatch second hand it is found that they are not at the '12' or '0' position, correct as follows: 1. Pull crown to "c" position. 2. Press pusher “a” continuously, the stopwatch second hand will advance rapidly until it gets close to the “12” ...
36 37 a b c crown position vd51 pusher b pusher a stopwatch minute hand stopwatch second hand date date a b c crown position pusher “b” 24-hour hand vd53 stopwatch second hand stopwatch minute hand this chronograph watch has 3 functions: time, calendar, stopwatch time to set the time: 1. Pull crown ...
38 39 standard stopwatch measurement: 1. Press pusher “a” to start timing. 2. Press pusher “a” to stop timing. 3. Press pusher “b” to reset. Split time measurement example of using split time measurement for two runners. Two runners can be timed simultaneously; the first runner’s time can be recorde...
40 41 a b c crown position 8171/202 pusher b pusher a stopwatch minute hand permanent second hand date stopwatch second hand date 8172/220 pusher a stopwatch minute hand permanent second hand day date stopwatch second hand a b c crown position pusher b stopwatch minute hand permanent second hand sto...
42 43 stopwatch the stopwatch is capable of measuring: 1. 1 minute elapsed up to 30 minutes. 2. Chronograph hand 1/5 second. Before using the stopwatch, reset the stopwatch hands to the “12” & “0” position. Standard stopwatch measurement: 1. Press pusher “a” to start timing. 2. Press pusher “a” to s...
44 45 this chronograph watch has three functions: time, calendar, stopwatch time to set the time: 1. Pull crown to position "c" , the small hand at 6 o'clock returns to "60" position. 2. Turn crown clockwise to correct time. 3. Push crown to position "a", the small hand at 6 o'clock begins to run. C...
46 47 this chronograph watch has two functions: time, stopwatch time to set the time: 1. Pull crown to position "b". 2. Turn crown clockwise to correct time. 3. Push crown to position "a", the second hand begins to run. Js00 a b crown position pusher b pusher a second hand 24 hour hand stopwatch thi...
48 49 this chronograph watch has four functions: time, calendar, day of week, stopwatch time to set the time: 1. Pull crown to position "c". 2. Turn crown clockwise to correct time. 3. Push crown to position "a". Calendar to set the date: 1. Pull crown to position "b". 2. Turn crown clockwise to cor...
50 51 this chronograph watch has 3 functions: time, calendar, stopwatch time to set the time: 1. Pull crown to position ”c” 2. Turn crown clockwise / counter clockwise to correct the time. 3. Push crown back to position “a”. M363 pusher b pusher a lower hand 4 th center hand upper hand chrono hours ...
52 53 to set the second time zone: 1. Pull crown to position “b”. The 4th center hand will display the minutes of the second time zone. 2. Press pusher “a” to set the hour of second time zone. 3. Press pusher “b” to set the minutes. 4. Push crown back to position “a”. 4 th center hand adjustment 1. ...
54 55 this analog and digital watch has 6 function: analog and digital time display / auto calendar 2000-2099 / two time zones / two daily alarms linked to time zone / three linked countdown timers / chronograph with 42-lap memory / indiglo night light. Basic operation 1. In time mode, press and hol...
56 57 5. Press mode to select minutes, year, month, day, day of week, 12 or 24 time display, month-day or day-month date display. Press start/stop or lap/reset to advance selected item. 6. Press set/indiglo when done. 7. Press and hold lap/reset and wait for beep to change display to second time zon...
58 59 7. Press start/stop to start or stop loop timer. 8. With timer stopped, press and hold set/indiglo to reset all loops to zero. At end of timed loop, next loop timer starts. Cycle is continuous for up to 30 loops. Alarm 1. Press mode until alarm appears. 2. Press lap/reset to select alarm 1 or ...
60 61 this digital watch has 7 functions analog and digital time display / dual time / calendar / chronograph / timer / alarm / electroluminescent backlight mode selection press “mode” button to cycle through “time”, “alarm”, ”chronograph” and “timer” mode. Analog time to set the time: 1. Pull out t...
62 63 to set the alarm: 1. Press “mode” button until alarm mode appears. 2. Press and hold “set” button to begin setting alarm. 3. Press “mode” button to select the alarm hour or minute for setting. 4. Press “start/stop” button to set the alarm hour or minute. 5. Press “set” button to exit the alarm...
64 65 this digital watch has 6 functions time / calendar / day of week / chronograph / alarm / electroluminescent backlight mode selection press “mode” button to cycle through “time”, ”chronograph”, “alarm” and “time set” mode. Mw32 mode light adjust set crown digital models time mode in time mode, ...
66 67 2. Press “set” button to stop and record the timing of the first runner. ("split" will blink on the display if the split time function is active. Even though the stop watch is not on display, the timing will continue to run internally.) 3. Press “set“ button again to catch up the timing of the...
68 69 this chronograph watch has 3 functions: time, calendar, tide time to set the time: 1. Pull crown to position “c”. 2. Turn crown clockwise / counter clockwise to correct time. 3. Push crown to position “a”. Tide amplitude and moon phase counter hand small second hand hour hand tide cycle counte...
70 71 to set the tide amplitude (moon phase) – counter at 10 o’clock small eye the tide amplitude counter performs one revolution in 29 days 12 hours and 44 minutes. 1. Press and hold pusher “a” to 3 seconds after the beep indicated for enter in setting mode. 2. Press pusher “a” again to set the tid...
72 73 this watch has 4 functions: time, calendar, world times, season time to set the time: 1. Pull crown to position ”c” 2. Turn crown clockwise / counter clockwise to correct the time. 3. Push crown back to position “a”. M366 m366 pusher b pusher a pusher c season scale 24 cities upper hand world ...
74 75 4. Press pusher “a” or “b” to move the 4th center hand backward or forward to adjust the world time, respectively, to set the world time zone to be the same as the home time zone. Press and hold a pusher to change the time quickly. The hands move together as the center hand makes one revolutio...
76 77 this watch has 6 functions: time, calendar, tide, temperature, compass and night light indiglo ® night-light press the crown to activate the light. M314 crown position a b c pusher b pusher a pusher c time to set the time: 1. Pull crown to position “c” 2. Turn crown clockwise / counter clockwi...
78 79 tide / temperature selection tide function: - press b (tide) push button to select the tide clock. (the indicator hand moves to low tide and then to current tide) temperature function: - press a (temp) push button to select the thermometer. (the indicator hand moves to beginning of thermometer...
80 81 field around the watch. Do not store the watch near any source of magnetism, such as a computer, appliance, or television, as the watch can take on a magnetic charge, yielding inaccurate headings. Typical accuracy of wrist-worn instruments is within +/- 10 degrees. To calibrate the compass: 1....
82 83 this watch has 3 functions: time, calendar and solar power time to set the time: 1. Pull crown to position “c”. 2. Turn crown clockwise / counter clockwise to correct time. 3. Push crown to position “a” calendar to set the calendar: 1. Pull crown to position “b”. 2. Turn crown clockwise to cor...
84 85 this watch has 4 functions: time, calendar, temperature and depth sensor time to set the time: 1. Pull crown to position “c” 2. Turn crown clockwise / counter clockwise to correct time 3. Push crown to position “a” m367 crown position a b c off indicator 4th center hand depth scale pusher lowe...
86 87 note: if the readings remain in the range of 0 to 2 meters (0-6 feet) for 5 minutes, the sensor will turn off automatically. Turn off the sensor: after turning on the sensor, you can turn it off manually. 1. Press and hold pusher for 2 seconds. 2. The 4th center hand will move back to the off ...