NAVICOM RT-300 Installation And Operation Manual

Manual is about: VHF

Summary of RT-300

  • Page 1

    Vhf marine radio rt- 00 3 installation and operation guid e navicom plaisance: z.A. Des boutries, 78700 conflans ste honorine tel: 01.39.72.19.90 fax: 01.39.19.28.98 navicom pro: 3, rue j. Cugnot, z.A.C petit guelen, 29000 quimper tel: 02.98.94.64.70 fax: 02.98.94.69.71.

  • Page 2: Table Of Contents

    1 table of contents equipment description…………………………………....……….…..…2 introduction….…………………………………..………..………………..2 safety information……………………………………………….………..3 using the radio…………………………………………....…….…….…3 display...………………………………………………………….……......3 function and location of the controls……………………….…….….4 bas...

  • Page 3: Equipment Description

    2 equipment description introduction your hand-held marine vhf radio rt300 represents the state- of-the-art in high-tech engineering. Designed for international operation. Thisallows you to transmit and receive on all international channels in the vhf marine band, as assigned by the in ternational u...

  • Page 4: Dw/tri ----

    3 backlit lcd display --------allows you to operate the transceiver in dark environment. Memory channels ----lets you store channels as memory channels. Dw/tri ---- lets you to select dw/normal mode or tri/normal mode. We recommend you record your radio’s serial number is on the transceiver’s back p...

  • Page 5: Using Your Radio

    Using your radio display your radio comes with a multifunctional display. Scan mode indicator primary channel indicator weather station alarm on indicator weather station indicator memory channel indicator receiving indicator atis on indicator usa band indicator international channel indicator canad...

  • Page 6: Basic Operation

    5 function and location of the controls basic operation before operating your radio, please install 4 "aa" size battery cells into the main unit. Antenna power/volum knob ptt key ch 16 key channel up channel down sql/moni key dw/tri key scan/memo key band key hi/lo/lock key chg/mic/speaker jack.

  • Page 7

    6 turning on/off your radio rotate power/volume knob to turn the radio on or off with an indicating voice of click. And adjust the volume to a comfortable level. Adjusting squelch press and release the sql key to enter squelch mode,press the to adjust squelch level. Press and release the sql key aga...

  • Page 8

    7 scanning features your rt300 is equipped with three types of scan options: all scan, saved(memory) scan and priority scan. If there are no channels in memory, the default is all scan. This function automatically searches for transmissions on the channel set being scanned. If a tx signal is receive...

  • Page 9: Adding Channels To Memory

    8 adding channels to memory your rt300 can store any channel (including private channels). The stored channels are the ones scanned in the saved (memory) scan mode. To add channels to memory 1. During normal operation mode, use the up or down key to select the desired channel for programming. 2. Pre...

  • Page 10: Tri Watch

    9 press and release the dw/tri button to terminate dual watch and return to the previous working channel. Press and hold the dw/tri button to terminate dual watch mode and go into tri watch mode. Press and release the 16 button to terminate dual watch mode and switch to the priority channel. Note: d...

  • Page 11: Using The Batteries

    10 using the batteries when the battery level is low, please replace the batteries.Before replacing the batteries, the volume control must be rotated fully counterclockwise, until a click is heard, to turn the power off. You can replace the old batteries just with 4 new aa size battery cells. 1. Lif...

  • Page 12: Using The Belt Clip

    11 using the belt clip the supplied belt clip lets you easily, attach the belt clip to the radio as illastrated below: note: the ni-mh batteries and ac adapter are the optional accessories of the radio. The charging can not stop itself without prevention even when the batteries have been fully charg...

  • Page 13: Technical Specifications

    12 technical specifications channels…………………………………..All international channels frequency method………………………….………….Phase lock loop frequency range…………………………..Tx 156.025~157.425 mhz rx 156.300~162.000 mhz power supply………………………..…………………..………4xaa operating temperature……………………….....-15℃ to +55℃ dimensions (h...

  • Page 14: Frequency Charts

    13 frequency charts unit: mhz tx rx mode remark tx rx mode remark 01 156.050 160.650 d 60 156.025 160.625 d 02 156.100 160.700 d 61 156.075 160.675 d 03 156.150 160.750 d 62 156.125 160.725 d 04 156.200 160.800 d 63 156.175 160.775 d 05 156.250 160.850 d 64 156.225 160.825 d 06 156.300 156.300 s 1w ...

  • Page 15

    Declaration of conformity.