Navpixel NPS1535 User Manual - page 2

Manual is about: 15” IP-65 Marine Display Panel PC

Summary of NPS1535

  • Page 1

    Page 1 navpixel™ nps1535 user manual 15” ip-65 marine display panel pc sunlight readable led b/l lcd (1st edition 2/18/2009) all information is subject to change without notice. Approved by checked by prepared by ming hank jacky.

  • Page 2

    Page 2 record of revision version and date page old description new description remark.

  • Page 3

    Page 3 table of content record of revision ........................................................................................................ 2 1.0 introduction............................................................................................................ 5 2.0 safety ...............

  • Page 4

    Page 4 usage notice precautions to maximize the life and safe use of your unit, always be sure to follow the warnings, precautions and maintenance recommendations in this user’s guide. In a watercraft or vehicle: z the panel pc should be visible to the driver only if it is used for navigation, or sy...

  • Page 5

    Page 5 1.0 introduction 1.1 about navpixel™ marine display panel pc navpixel™ nps1535, the high-performance, rugged touch panel pc panel pc, is specially engineered to survive the most demanding applications. You will soon become familiar with the quality difference in this bright sunlight readable ...

  • Page 6

    Page 6 1.5 system general specificati0ns: system processor supports intel ® core 2 duo (merom)/ core duo/ core solo/ celeron m (yonah) processors system memory 240-pin dimm x 2, ddrii 400/533/667 up to 4gb chipset intel ® 945gm + ich7m (-dh optional for raid) ethernet intel 82573l 10/100/1000base-tx...

  • Page 7

    Page 7 2.0 safety general safety instructions • before operating the navpixel™ nps1535 panel pc panel pc, read this user manual thoroughly • keep this user manual for future use • verify the computer system capability (see packaging contents & installation) to insure operation of the panel pc • for ...

  • Page 8

    Page 8 connecting cables • disconnect the power to the computer when the panel pc is being installed, and • upon installation, verify the power connector is securely seated on the unit. Power source this unit may be operated from an ac (optional) or dc (standard) power source. • use the supplied pow...

  • Page 9

    Page 9 3.0 product care and maintenance product care this navpixel™ nps1535 marine display has been designed to provide optimum performance and service without any required scheduled maintenance other than occasional cleaning. Disconnect the monitor from the power source before cleaning the monitor,...

  • Page 10

    Page 10 • for flush or panel mount units, cover the product with a protective covering that will not scratch or transfer any dyes to the display screen. Maintenance power cord to avoid shock and fire hazards, replaced the unit’s power cord if: .insulation becomes damaged, or .a loose connection is s...

  • Page 11

    Page 11 4.0 packaging contents the navpixel™nps1535 is shipped in a box with pe foam packaging. It is recommended the installer save the box and all packaging materials in case the unit would need to be returned to the service center or local dealer. (figure 1) one navpixel™ nps1535 unit user cd wit...

  • Page 12

    Page 12 5.0 connectors 5.1 connectors connectors are located on the bottom of the unit housing, from left to right (figure 2): connectors are physically unique to insure the installer makes the proper connections. (figure 2).

  • Page 13

    Page 13 6.0 installations the navpixel™ nps1535 is designed to be mounted in two configurations: 6.1 vesa75 / vesa100 mount the navpixel™ nps1535 is designed compatible with vesa75 and vesa100 mount. By installing the panel pc with this kit, the user can adjust the viewing angle to improve viewabili...

  • Page 14

    Page 14 7.0 osd operation buttons your sunlight readable panel pc can be controlled using the manual buttons on the front bezel of the unit. The manual enables you to change the way in which your display is set up brightness using the manual buttons. Power on/off button power on: to press the power ...

  • Page 15

    Page 15 hdd led button the hdd led is for the pc system access status light. Light sensor the light sensor is used to detect the ambient light and then adjust the brightness automatically. Brightness up dimming up the display brightness. Brightness down dimming down the display brightness..

  • Page 16

    Page 16 8.0 award bios setup awards bios rom has a built-in setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed cmos ram so that it retains the setup information when the power is turned off. Entering setup power on the compu...

  • Page 17

    Page 17 frequency/voltage control use this menu to specify your settings for auto detect dimm/pci clock and spread spectrum. Load fail-safe defaults use this menu to load the bios default values for the minimal/stable performance for your system to operate. Load optimized defaults use this menu to l...

  • Page 18

    Page 18 9.0 driver installation insert the driver cd, please follow the sequence below to install the drivers. Follow the sequence below to install the drivers: step 1 – install inf driver step 2 – install vga driver step 3 – install lan driver step 4 – install audio driver step 5 – install sata dri...

  • Page 19

    Page 19 step 5 – install sata driver 1. Click on the step 5- ich7m-ghm sata driver folder 2. Select the win os folder and then double click on iatabl_cd.Exe 3. Follow the instructions that the windows shows 4. The system will help you install the driver automatically.

  • Page 20

    Page 20 10.0 appendix outline dimensions unit: mm.