Navtech Systems Rover Director User Manual
Navtech Systems Video Links
Navtech Systems
Limited
Sulby, Nr. Welford, Northamptonshire. NN6 6EZ. UK.
Telephone: +44 (0)1858 880 857 Fax: +44 (0)1858 880 859
E-mail: sales@navtechsystems.co.uk
Web: www.navtechsystems.co.uk
ROVER “Director” MkII
COFDM Video Receiver User Manual
The Rover “Director” is a portable, easy to use, hand
held receiver with a 7” full colour monitor.
The
‘Director’ features dual channel diversity reception
to give exceptional performance in the most challenging
conditions.
The ‘Director’ has an external V-lock battery docking
port. The IDX-type V-lock facility provides for easy, rapid
battery changes with operation times in excess of five
hours. Optional carry case, shoulder strap and sun visor
(for outside viewing in diffused sunlight or in bright studio
lighting) are available
The integrated monitor displays video in either 4 : 3 or
16 : 9 format in normal or zoom modes. This User
Manual also includes the monitior set up procedures to
suit the application
.
Rover Director Monitor Receiver
Top Panel
Up to sixteen RF channel settings are available via a simple rotary switch located at the RH side,
adjacent to the antenna mount.
Two LED indicators show ‘Signal Lock’ and (battery) power status.
The LH Lock LED shows ‘blue’ when a transmission ‘lock’ is achieved
The ‘Power’ Indicator LED shows:-
Green when input voiltage is above 13.5 V Receiver OK to operate
Amber when between 11 & 13.5 Volts
Receiver OK to operate
Red when input drops below 11 Volts
Receiver will fail below 9 Volts i/p – change battery!
The LH side dual Signal Level LED bar graph shows the signal strength of each channel. The
amber
LEDS indicate low to medium signal reception;
green indicates good usable signal levels.