Navtex NVX-1000 Safety & Operating Instructions Manual - page 10
Page
10
Troubleshooting
No.
Problem
Check point
1
No power
(no picture on monitor)
Check to make sure the AC plug is firmly inserted into
the AC outlet.
2
Power is on, but no picture
on the monitor
Check the all cable connections to ensure that all are
firmly connected between the monitor and the camera.
Check the polarity of wires, they may not be correctly
in connection between the outdoor camera unit and
indoor monitor unit.
3
The picture is too dark or
white
Use the Menu buttons located on the lower right side
of the indoor monitor, adjust brightness, contrast, and
saturation control
4
Chime sound is too low
Adjust the volume control
Environmental Protection
• Waste electrical products should not be disposed of with household waste. Please
recycle where facilities exist. Check with your Local Authority or retailer for recycling
advice.