Instruction manual nab-4001 wireless audio adapter with bluetooth ® for aux input connectors.
Page 2 naxa electronics at a glance 1 pair status indicator 2 power indicator 3 power/pair button 4 usb charge port 5 line out jack press and hold the power/pair button to turn the unit on or off..
Www.Naxa.Com page 3 pair status indicator status indicator searching slowly flashing light pair mode quick flashing light paired steady light power indicator status indicator power off light is off power on steady green light low power flashing green light charging slowly flashing red light charging...
Page 4 naxa electronics connecting use the included 3.5mm line cable to connect the line out jack [5] to the line input jack of a speaker system or other audio device. Then, press and hold the power/pair button [3] to turn the unit on. Note: if the unit does not turn on, the battery level may be too...
Www.Naxa.Com page 5 pairing before using a wireless player with bluetooth(r), you will need to establish a connection between it and your naxa device. This process is called “pairing” and you will only have to do it once. Once two devices are paired, they will automat- ically connect when they detec...
Page 6 naxa electronics support if you have problems with your device, please consult the instructions in this manual. Please also visit us on the web at www.Naxa.Com to get up to the minute news, alerts, and documen- tation for your device. For additional assistance, please contact naxa technical s...
Www.Naxa.Com page 7.
Naxa electronics 2320 e 49th st vernon, ca 90058 www.Naxa.Com.
