Instruction manual nab-4002 wireless audio adapter with bluetooth ® for ipod ® /iphone ® dock and aux connectors.
Page 2 naxa electronics at a glance 1 power/pair button 2 usb charge port 3 line out jack 4 pair status indicator 5 power indicator 6 30-pin dock connector press and hold the power/pair button to turn the unit on or off..
Www.Naxa.Com page 3 pair status indicator status indicator searching slowly flashing light pair mode quick flashing light paired steady light power indicator status indicator power off light is off power on steady green light charging steady red light low power flashing green light charging use the ...
Page 4 naxa electronics connecting the nab-4002 can connect to speaker docks that are made for ipod ® /iphone ® or to speak- ers with a 3.5mm aux input. Ipod ® and iphone ® docks 1) set the dock to ipod mode. (refer to the manual of your dock for instructions.) 2) connect the nab-4002 to the dock. T...
Www.Naxa.Com page 5 aux input use the included 3.5mm line cable to con- nect the line out jack [3] to the line input jack of a speaker system or other audio device. Then, press and hold the power/ pair button [1] to turn the unit on. Note: if the unit does not turn on, the battery level may be too l...
Page 6 naxa electronics pairing before using a wireless player with bluetooth ® , you will need to establish a connection between it and your naxa device. This process is called “pairing” and you will only have to do it once. Once two devices are paired, they will automat- ically connect when they d...
Page 7 naxa electronics support if you have problems with your device, please consult the instructions in this manual. Please also visit us on the web at www.Naxa.Com to get up to the minute news, alerts, and documen- tation for your device. For additional assistance, please contact naxa technical s...
Naxa electronics 2320 e 49th st vernon, ca 90058 www.Naxa.Com.
