Pb5 5 amp booster reference manual nce corporation 82 east main street webster, ny 14580
Product manual for pb5 5 amp booster preface this manual provides information pertaining to the installation and operation of the pb5 booster only. Components the pb5 comes supplied as follows: 1 - black box labeled five amp power booster in the upper center and pb5 in the lower, right corner. 1 - 7...
Wiring to a digitrax system this wiring diagram is provided for the operators that wish to add an nce power booster to their existing digitrax system. This cable splicing is required to the first db100/db150 only. Always leave the “ground to sync” jumper installed. Copyright & trademarks copyright ©...
Bus is less than 2 feet. Use of a smaller bus will prevent the booster from detecting a short circuit and may be a fire hazard. The voltage to the track is dependent on the power source input voltage as discussed below. The dcc track voltage can be changed from 13.8 to 12 volts by setting the switch...
