The krasnogorsk-3 operating instructions sold by ncs products, new york.
Krasnogorsk-3 owner’s manual [6] viewfinder [7] light meter fps dial [8] light meter power switch [9] light meter asa/iso knob [10] pistol grip [11] lens focus [12] f-stop adjustment [13] trigger [14] speed control [15] winding handle [16] film cutter [17] feed spindle [18] footage counter arm [19] ...
Krasnogorsk-3 owner’s manual © 2003 ncs products rev 3.00 page 3 of 6 introduction congratulations on your purchase of one of the best things ever made in the ussr, the krasnogorsk-3 motion picture camera! Built as rugged as a t-72 tank and as precise as the mir space station, the k-3 will give you ...
Krasnogorsk-3 owner’s manual © 2003 ncs products rev 3.00 page 4 of 6 winding the camera the spring motor uses a governor to maintain a constant film speed from the beginning of a shot until the spring has wound out. To wind the spring use the winding lever located on the side of the camera. Lift th...
Krasnogorsk-3 owner’s manual © 2003 ncs products rev 3.00 page 5 of 6 cover the viewfinder when shooting single-frame to prevent light leaking in and fogging the film. The cap from a 35mm film canister is a perfect fit (pull off the rubber eyepiece and snap on the cap). Also, cap the lens between ex...
Krasnogorsk-3 owner’s manual © 2003 ncs products rev 3.00 page 6 of 6 camera specifications film type 16mm single or double perforation maximum film load 100 foot daylight load frame rate 6-50 fps and single-frame lens 17-69mm f1.9 zoom lens thread m42x1, “pentax screw mount” or bayonette lens filte...
