6in. Cutoff saw owner’s manual warning: read carefully and understand all assembly and operation instructions before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. 0911 item# 338070
Page of 9 2 thank you very much for choosing a northern industrial product! For future reference, please complete the owner's record below: model: _______________ purchase date: _______________ save the receipt, warranty and these instructions. It is important that you read the entire manual to beco...
Page of 9 3 important safety considerations • make sure the cutoff wheel is securely mounted as described in the assembly instructions, before connecting the tool to a power supply. Do not tighten wheel excessively, since this can cause cracks. • check wheel for fissures and cracks, and test for nor...
Page of 9 4 cutoff wheel installation warning! Use only reinforced, 6in. Cutoff wheels, rated for 10,000 rpm or higher. 1. Disconnect saw from the power source. 2. Inspect the replacement wheel for defects such as cracks, chipping, and correct speed rating. If defects are found or the speed rating i...
Page of 9 5 2. Rotate the vise fence until the desired angle of cut is aligned with the indicator arrow in th saw base (14). 3. Check the angle of the vise fence to the cutoff wheel using a protractor, bevel square, or similar device. 4. Using the supplied allen wrench, securely tighten the bolts ho...
Page of 9 6 use a steady and even pressure to obtain a uniform cut. Never force the wheel into the material. 4. When the cut is complete, release the trigger switch and allow the wheel to stop completely before raising it to the full open position. Danger! Do not touch the cut material until it cool...
Page of 9 7 diagram & parts list.
Page of 9 8 part # description q’ty part # description q’ty part # description q’ty 1 swivel arm lock handle 1 32 pan head screw m6*16 3 64 hex socket head bolt m8*20 1 2 hex socket head nut m8 1 32a flat washer d6 3 65 ball bearing 627 1 3 adjust spindle 1 33 arbor 1 66 retaining ring d12 1 4 flat ...
Page of 9 9 for replacement parts and technical questions, please call 1-800-222-5381 . Warning some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the state of california to cause cancer, birth defects or other reproductive h...
