Rs-232c adapter (model 91100-85) user guide 68x343601 rev 1 05/07.
Contents before you begin… …………………………………1 devices that can be used with this rs232 adapter……1 what this adapter enables you to do…………………..1 what you need before using the adapter……………...1 connecting your rs232c adapter………………….2 setting up your devices……………………………..3 setting up your thermo devices…………...
Before you begin… devices that can be used with this rs232 adapter: 91100-50 dualogr thermocouple thermometer 93210-50 thermologr thermister thermometer 93410-50 thermologr rtd thermometer 37003-02 humiditylogr thermohygrometer ph/ orp/ ion/ conductivity/ tds/ salinity/ resistivity/ dissolved oxygen...
Connecting your rs232c adapter if you are connecting to a laptop or computer, please use the 9-pin plug. 1) connect the phone jack cable to your rs232c adapter and the other end to the 9-pin connector plug or 25-pin connector plug. 2) if using a pc, ensure that your pc is plugged into a power source...
Setting up your devices for 600 series devices: pcd 650, pc 650 & pd 650 cd 650, ph 620, 610 & 600 cond 610, 600 & do 600 in order to start printing on your microprinter, you must first configure your device to be compatible with it. Please follow these steps: 1) turn your device on. 2) with the e o...
Setting up your thermo devices for these devices: 91100-50 dualogr thermocouple thermometer 93210-50 thermologr thermister thermometer 93410-50 thermologr rtd thermometer 37003-02 humiditylogr thermohygrometer 91100-50 dualogr set-up the interval may be set to any time from once every 3 seconds to o...
37003-02 humiditylogr set-up the interval may be set to any time from once every 4 seconds to once every hour. This example will set the thermohygrometer to print live readings once every 4 seconds. Press setup, then print. The display indicates “minutes:seconds” with the last printing interval setu...
Port settings for all other models: baud rate data bits parity flow control stop bits 2400 8 none none 1 1) click on ok. A red light should now be visible in the window of the rs- 232c adapter. 2) to transfer the data, click on “transfer”. Then “capture text”. 3) enter a descriptive file name and cl...
Accessories order code part no. Description 01x344202 01x344202 rs232 (led) interface adaptor (for meter to pc/microprinter communication) ecmicroprntr01 01x230001 serial impact microprinter (110 vac) ecmicroprntr02 01x230002 serial impact microprinter (220 vac) ecmicroprntro2clk 01x230004 serial im...
