- DL manuals
- Ocean Electronic
- Electric Heater
- Tabletop Heater
- Owner's Manual
Ocean Electronic Tabletop Heater Owner's Manual
Summary of Tabletop Heater
Page 1
Owner’s manual tabletop heater c us safety first! Read and become familiar with this entire manual. Please retain this manual for reference distributed by: rta international youngtown, az 85363 1-888-775-1330
Page 2: Owner’S Manual
Owner’s manual ? ? ? ? ? ? ? ? ? ? ? ? ? ? Read these safety instructions......................................... Contents breakdown.......................................................... Screw packing list............................................................. Assembly procedure.............
Page 3: Owner’S Manual
Owner’s manual if you smell gas shut off gas to the appliance extinguish any open flame open lid if odor continues immediately call your gas supplier or your life department : . . . , . ? ? ? ? ? ? ? ? Only to be used outdoors warning accessible parts may be very hot keep young children away turn of...
Page 4: Owner’S Manual
Owner’s manual 2 contents breakdown.
Page 5: Owner’S Manual
Owner’s manual 3 item no. Item qty. Item no. Item qty. 1 m6 castle nut 3 11 burner 1 2 reflector 1 12 3/16" bolt 4 3 Ø6mm washer 3 13 m5×10mm bolt 1 4 emitter screen 1 14 tank housing 1 5 guard 1 15 igniter button 1 6 door plate 1 16 control knob 1 7 base 1 17 handle 1 8 cast iron 1 18 regulator 1 9...
Page 6: Owner’S Manual
Owner’s manual 4 assembly 1-1. Take out all the parts of the tabletop heater. 1-2. Aim the cast iron at the holes on the base. 2-1. Use 4pcs m6x15mm bolts to fix the tank housing to the base & cast iron. 2 - 2 . Ti g h t e n t h e b o l t s a s above show. 3-1. Put the burner on the tank housing the...
Page 7: Owner’S Manual
Owner’s manual 5 5-1. Fix 3pcs pins of 60mm length to the emitter screen with 3pcs m6 flange nuts then tighten them. 6-1. Put the emitter screen on the burner. 6-2. Use 4pcs 3/16” bolts to connect the emitter screen to the burner. Tighten the bolts. 7-1. Put the guard on the burner through the emitt...
Page 8: Owner’S Manual
Owner’s manual 6 10-1. Fasten the reflector with 3pcs m6 castle nuts. 9-1. Put the reflector through the pins and on the washers. 11-1. Turn off the control knob of the burner. 11-2. Fix the 1.02lbs gas tank (not included) to the regulator (rotate the gas tank clockwise toward the regulator until ti...
Page 9: Owner’S Manual
Owner’s manual 7 caution: this appliance is for outdoor use only(outside any enclosure) always make sure there is fresh air ventilation. Use only outdoors in a well-ventilated space, never use in a building, garage or any other enclosed area. Always maintain at least 18“clearance(top)and 24”clearanc...
Page 10: Owner’S Manual
Owner’s manual 8 make 1-2 oz. Of leak solution by mixing one part liquid dishwashing soap and 3parts water. Spoon several drops(or use squirt bottle ) of the solution onto the regulator/canister connections. Inspect the connections and look for bubbles. If no bubbles appear, the connection is safe. ...
Page 11: Owner’S Manual
Owner’s manual 9 ? ? ? ? ? ? ? Heater is on a hard and level surface. There are no signs of spider or insect nests. All burner passages are clear. All air circulation passages clear. Children, pets, clothing, flammable materials and items that can be damaged from radiant heat are away from the heate...
Page 12: Owner’S Manual
Owner’s manual 10 lighting 1. Turn gas control knob to “off” position. 2. Push in and rotate the control knob to“pilot”position. Depress igniter button. 3. Once burner is lit, hold control knob in for at least 30 seconds and release. 4. If burner does not stay lit, turn to“off” position and wait 5 m...
Page 13: Owner’S Manual
Owner’s manual 11 ? ? ? Gas control is in off position. Disconnect gas line. Heater is upright in a secure location. ? ? ? ? ? ? ? To enjoy years of outstanding performance from your heater, make sure you perform the following maintenance activities on a regular basis: inspect the visible portion of...
Page 14: Owner’S Manual
Owner’s manual 12 problem probable cause solution pilot will not light tank fuel empty replace lpg tank opening blocked clean or replace opening air in supply system purge air from lines loose connections check all fittings pilot will not stay on debris around pilot clean dirty area loose connection...