Swimming pool heat pump user manual model : ks8r ks12r ks15r ks20r 1 www.Pac-direct.Com.
Introduction congratulations for buying a reversible heat pump for your swimming pool. This machine was installed in accordance with the current norms and it is now ready to be used. In order that you might be fully satisfied with this machine, you’ll find below a few remarks : - the heat pump heats...
Summary safety instructions ........................................................................................... P4 technical characteristics.................................................................................... P4 principle of working...............................................
The heat pump uses the free heat contained in the outside air to transmit it to the swimming pool water. The ventilator located in the heat pump has the air circulated on the radiator with gilds. When the heat pump heats the swimming pool, the air blown is fresher than the outside air. In the contra...
Before starting: your machine is tested and regulated in factory, however it is advised to carry out the following controls before starting : - electric connections correctly carried out - installation carried out according to our recommendations - correct connection of arrival and exit water pipes ...
Description of the order and display panel : two figures on the left : temperature of the swimming pool heating display cooling display or two figures on the right : desired temperature to adjust the current hour and functionning timetable - adjustment of the temperature desired -adjustment of the s...
Procedure of use action external appliance or button of heat pump display heat pump answer put the heat pump under tension engage the circuit breaker of the heat pump indicates the current hour put in circulation the swimming pool water into the pipes engage the circuit breaker of pump of filtration...
Adjustments adjustment of operation timetable(timer): 1). While heat pump stops, press “clock” key to enter the set of o’clock. Press on the keys “ ”to increase or decrease hour numbers. Press “clock”key again to enter the adjustment mode of the minute. Press “clock”key once more to confirm the sett...
8 - regular operations of maintenance washing the sand filter of your filtration installation : stop the heat pump wintering : stop and put the heat pump out of tension stop and put the filtration pump out of tension close the 2 isolating valves nearest of the heat pump entirely unscrew the 2 connec...
9 – error codes and how to solve them : this table explains the error codes caused by a defective regulating component or by a security operation. You have to call your retailer. Screen and state of the heat water pump component possible cause intervention of your retailer e 1 the heat pump continue...
10-problems / solutions : the difficulties met the most often can be solved by reading the table below. If nothing corresponds to the list, or if the solutions applied do not solve the problem, refer to directions for installation and maintenance or contact your retailer. Difficulty observation prob...
