Protos 380 Instruction Manual

Summary of 380

  • Page 1

    Protos 380- instructions manual instructions manual 1 release 1.0 always check on www.Msheli.Com for a more recent version of this manual main rotor diameter................. Tail rotor diameter.................. Length without main blades....... Length with main blades........... Overall height.......

  • Page 2

    Index instructions manual 2 pages content 3 safety rules 4 tools required for assembly 5 r/c equipment required to complete 6 how to read this manual 7 motor pinion teeth choice 8-30 main frame assembly 31-40 head assembly 41-55 tail assembly 56 esc, bec 57 - 61 canopy installation 62 battery instal...

  • Page 3

    Always follow these rules for safety instructions manual 3 operate the helicopter in open areas with no people nearby. Do not operate the helicopter in the following places and situations (or else you risk severe accidents): -in places where children gather or people pass through -in residential are...

  • Page 4

    Tools required for assembly instructions manual 4 thrust bearing grease slow curing epoxy where indicated use thread lock medium hexagon screw drivers : 1,5mm 2,0mm two 2,5mm (spindle).

  • Page 5

    Tools required for assembly instructions manual 5 main blades: standard full carbon blades 380mm esc : at least 50a swashplate servos supported: all micro servos (qnty. 3) tail servo supported: all micro and mini servos (qnty. 1) trasmitter / receiver: satellites: spektrum : dsm 2 - dsm x futaba : s...

  • Page 6

    How to read this manual instructions manual 6 box and bag where you can find washers, bearings, screws and parts msh spare part code apply a thin layer of threadlock on the external part of the ball bearing pay attention to the instruction step behind this icon 1 3 4 2 5 hex screw m3x6 art. Msh71108...

  • Page 7

    Motor pinion teeth choice instructions manual 7 sport 3d hard 3d 1360 kv ø 3,5mm 14t 15t 16t sport 3d hard 3d 890 kv ø 5mm 22t 22t 24t.

  • Page 8

    Instructions manual instructions manual 8 motor mount protos 380 art. Msh41183 hex screw m2,5x5 art. Msh41123 guide pulley motor protos 380 art. Msh41184 guide pulley support protos 380 - front side - art. Msh41185 hex screw m2x4 art. Msh41141 washer 2,1x5,5x1 art. Msh41144 ball bearing bb 3,5x9x4 a...

  • Page 9

    Instructions manual instructions manual 9 motor mount protos 380 art. Msh41183 hex screw m2,5x5 art. Msh41123 guide pulley motor protos 380 art. Msh41184 guide pulley support protos 380 - front side - art. Msh41185 hex screw m2x4 art. Msh41141 washer 2,1x5,5x1 art. Msh41144 ball bearing bb 3,5x9x4 a...

  • Page 10

    Instructions manual instructions manual 10 hex screw m3x6 art. Msh41130 not included where i can find the parts.

  • Page 11

    Instructions manual instructions manual 11 hex grub screw m3x3 art. Msh41189 art. Msh41133 pinion where i can find the parts tighten hard and make sure the grub screw engages in the recess when tightening 9 mm no gap bag 1.

  • Page 12

    Instructions manual instructions manual 12 hex grub screw m3x3 art. Msh41133 where i can find the parts (optional) pinion ø5 22t art. Msh41192 pinion ø5 24t art. Msh41193 pinion ø5 25t art. Msh41194 9 mm 0,5mm gap bag 1 tighten hard and make sure the grub screw engages in the recess when tightening.

  • Page 13

    Instructions manual instructions manual 13 frame central plate art. Msh41143 m2,5 nut art. Msh51137 m2,5x10 art. Msh51143 do not fully tighten yet pre-assembled ball bearing 6x12x4 art. Msh41074 art. Msh41154 washer 2,6x6,5x1,5 art. Msh41217 where i can find the parts bag 1 + bag 13.

  • Page 14

    Instructions manual instructions manual 14 belt tensioner art. Msh41142 pre-assembled guide pulley arm - up - guide pulley arm - down - guide pulley bushing washer 2,1x5,5x1 msh41144 guide pulley ball bearing 4x7x2,5 art. Msh41070 ball bearing 4x7x2,5 art. Msh41070 hex screw m2x4 art. Msh41141 where...

  • Page 15

    Instructions manual instructions manual 15 m2,5x5 art. Msh41123 where i can find the parts bag 1.

  • Page 16

    Instructions manual instructions manual 16 main pulley assembly art. Msh41145 pre-assembled hex screw m2x4 art. Msh41141 main pulley art. Msh41146 oneway hub oneway hub ball bearing 10x15x4 autorotation pulley art. Msh41147 oneway shaft where i can find the parts box.

  • Page 17

    Instructions manual instructions manual 17 main shaft hollow protos 380 art.Msh41148 m2,5x16 art. Msh51145 m2,5 nut art. Msh51137 where i can find the parts this side up bag 2.

  • Page 18

    Instructions manual instructions manual 18 front belt art.Msh41149 where i can find the parts bag 2.

  • Page 19

    Instructions manual instructions manual 19 where i can find the parts bag 2.

  • Page 20

    Instructions manual instructions manual 20 tail belt art.Msh41150 where i can find the parts bag 2.

  • Page 21

    Instructions manual instructions manual 21 carbon main frame protos 380 art. Msh41151 hex screw m2x6 art. Msh41122 washer 2,1x5,5x1 art. Msh41144 where i can find the parts bag 2 + bag 3.

  • Page 22

    Instructions manual instructions manual 22 hex screw m2x6 art. Msh41122 washer 2,1x5,5x1 art. Msh41144 carbon main frame protos 380 art. Msh41151 where i can find the parts bag 2 + bag 3.

  • Page 23

    Instructions manual instructions manual 23 hex screw m2x8 art. Msh41128 lower plate protos 380 msh41152 landing gear white art. Msh41214 where i can find the parts (optional) landing gear black art. Msh41011 landing gear yellow art. Msh51309 bag 2 + bag 4.

  • Page 24

    Instructions manual instructions manual 24 hex screw m2x6 art. Msh41122 where i can find the parts bag 2.

  • Page 25

    Instructions manual instructions manual 25 servo frame protos 380 art. Msh41154 ball bearing 6x12x4 art. Msh41074 art. Msh41154 where i can find the parts bag 4 + bag 5.

  • Page 26

    Instructions manual instructions manual 26 hex screw m2x6 art. Msh41122 art. Msh41154 servo frame protos 380 art. Msh41154 where i can find the parts bag 5.

  • Page 27

    Instructions manual instructions manual 27 hex screw m2x6 art. Msh41122 art. Msh41154 washer 2,1x5,5x1 art. Msh41144 art. Msh41154 where i can find the parts do not fully thighten yet bag 5.

  • Page 28

    Instructions manual instructions manual 28 ball m2x4.8 art. Msh41009 m2 nut art. Msh41119 not included not included where i can find the parts bag 6 15 mm.

  • Page 29

    Instructions manual instructions manual 29 hex screw m2,5x8 art. Msh41131 where i can find the parts fully tighten bag 6.

  • Page 30

    Instructions manual instructions manual 30 main shaft lock art. Msh41005 m2x6 art. Msh41122 where i can find the parts -pull up main shaft -push down shaft lock -fully tighten bag 7.

  • Page 31

    Instructions manual instructions manual 31 swashplate art. Msh41020 pre-assembled ball bearing 2x5x2,5 art. Msh41066 art. Msh41020 m2x10 art. Msh41121 art. Msh41020 ball m2x2.8 art. Msh41010 art. Msh41020 where i can find the parts bag 13.

  • Page 32

    Instructions manual instructions manual 32 where i can find the parts.

  • Page 33

    Instructions manual instructions manual 33 anti swashplate spin msh41156 hex screw m2x6 art. Msh41122 washer 2,1x5,5x1 msh41144 where i can find the parts bag 7.

  • Page 34

    Instructions manual instructions manual 34 main hub protos 380 art. Msh41157 m2,5 nut art. Msh51137 hex screw m2,5x16 art. Msh51145 where i can find the parts bag 7 + bag 13.

  • Page 35

    Instructions manual instructions manual 35 ball bearing 2x5x2,5 art. Msh41066 art. Msh41098 washout arm art. Msh41099 art. Msh41098 washout uniball arm art. Msh41028 art. Msh41098 bb spacer art. Msh41098 2x12 pin art. Msh41098 where i can find the parts bag 7.

  • Page 36

    Instructions manual instructions manual 36 hex screw m2x10 art. Msh41121 where i can find the parts bag 7.

  • Page 37

    Instructions manual instructions manual 37 spindle protos 380 art. Msh41158 head dampers protos 380 art. Msh41155 step visible outside the main hub where i can find the parts washer 7,5x9,8x0,2 art. Msh41157 bag 8.

  • Page 38

    Instructions manual instructions manual 38 main blade holder protos 380 art. Msh41211 ball m2x4.8 art. Msh41009 ball bearing 5x10x4 art. Msh 5107 art. Msh41159 apply grease on thrust bearing thrust 5x10x4 art. Msh51065 art. Msh41159 washer 5x7,5x0,2 art. Msh41159 smaller hole bigger hole where i can...

  • Page 39

    Instructions manual instructions manual 39 spindle spacer art. Msh41158 step outside the main hub hex screw m3x8 art. Msh51152 art. Msh41158 washer 5x7,5x0,2 art. Msh41158 where i can find the parts bag 8.

  • Page 40

    Instructions manual instructions manual 40 rods set m2x35mm art. Msh41161 19mm uniball hand m2 art. Msh41030 art. Msh41161 where i can find the parts bag 9.

  • Page 41

    Instructions manual instructions manual 41 tail clamp frame side art. Msh41169 pin antirotation frame art. Msh41170 hex grub screw m3x5 art. Msh51160 boom protos 380 art. Msh41171 hex screw m2x10 art. Msh41121 where i can find the parts do not overtighten. Do not fully tighten yet bag 9 + box only m...

  • Page 42

    Instructions manual instructions manual 42 tail box art. Msh41162 ball bearing 5x10x4 art. Msh51071 art. Msh41162 tail shaft protos 380 art. Msh41163 tail pulley protos 380 art. 41164 pin 1,5x8 art. Msh41164 tail pulley bushing protos 380 art. Msh41164 ball bearing 5x10x4 art. Msh51071 art. Msh41165...

  • Page 43

    Instructions manual instructions manual 43 ball bearing 4x7x2,5 art. Msh51070 art. Msh41166 guide pulley art. Msh41166 guide pulley bushing art. Msh41166 hex screw m2x10 art. Msh41121 art. Msh41166 tail guide pulley protos 380 art. Msh41166 where i can find the parts bag 9.

  • Page 44

    Instructions manual instructions manual 44 hex screw m2x6 art. Msh41122 art. Msh41167 tail pitch support art. Msh41167 tail pitch lever screw m2,5x5 art. Msh41135 art. Msh41168 tail pitch lever art. Msh41168 ball m2x4.8 art. Msh41009 art. Msh41168 m2 nut art. Msh41119 art. Msh41168 hex screw m2x6 ar...

  • Page 45

    Instructions manual instructions manual 45 hex screw m2x6 art. Msh41122 art. Msh41167 ball bearing 2x5x2 art. Msh41066 art. Msh41167 where i can find the parts box + bag 10 hex screw m2,5x16 art. Msh51145 hex screw m2,5x25 art. Msh51145 msh41506 - msh41507 msh41508 - msh41509 carbon boom evoluzione ...

  • Page 46

    Instructions manual instructions manual 46 check the rotation direction during the installation of the belt where i can find the parts.

  • Page 47

    Instructions manual instructions manual 47 vertical fin protos 380 art. Msh41172 hex screw m2x18 art. Msh41219 pin antirotation frame art. Msh41170 where i can find the parts bag 3 + bag 10

  • Page 48

    Instructions manual instructions manual 48 spring belt tensioner art. Msh41153 where i can find the parts spring fixed pin support art. Msh41212 spring mobile pin support art. Msh41212 bag 2.

  • Page 49

    Instructions manual instructions manual 49 tail pitch plate assembly protos 380 art. Msh41173 tail plastic rod art. Msh41173 tail spindle art. Msh41174 hex grub screw m3x3 art. Msh41133 art. Msh41174 tail pitch plate assembly protos 380 art. Msh41173 pin 1,5x8 art. Msh41173 where i can find the part...

  • Page 50

    Instructions manual instructions manual 50 apply grease on thrust bearing internal hole smaller internal hole bigger tail blade holder art. Msh41175 ball bearing 4x8x3 art. Msh41071 art. Msh41176 thrust bearing 4x8x3,5 art. Msh41065 art. Msh41176 ball bearing 4x8x3 art. Msh41071 art. Msh41176 washer...

  • Page 51

    Instructions manual instructions manual 51 hex screw m2x4 art. Msh41141 tail pitch bushing art. Msh41176 hex screw m2x10 art. Msh41121 art. Msh41176 very important do not overtighten. Where i can find the parts bag 4 + bag 11.

  • Page 52

    Instructions manual instructions manual 52 tail servo support art. Msh41179 not included servo adapter art. Msh50086 art. Msh41179 hex screw m2x8 art. Msh41128 art. Msh41179 where i can find the parts bag 6.

  • Page 53

    Instructions manual instructions manual 53 servo adapter art. Msh50086 art. Msh41179 hex screw m2x8 art. Msh41128 art. Msh41179 hex screw m2x6 art. Msh41122 art. Msh41179 washer 2,1x5,5x1 art. Msh41144 art. Msh41179 where i can find the parts bag 6.

  • Page 54

    Instructions manual instructions manual 54 not included m2 nut art. Msh41119 ball m2x4.8 art. Msh41009 where i can find the parts bag 6 10 mm.

  • Page 55

    Instructions manual instructions manual 55 tail control assembly art. Msh41178 where i can find the parts box + bag 12.

  • Page 56

    Instructions manual instructions manual 56 not included battery and esc support protos 380 art. Msh41180 hex screw m2x6 art. Msh41122 art. Msh41180 where i can find the parts bag 4 + bag 12.

  • Page 57

    Instructions manual instructions manual 57 canopy support art. Msh41181 hex screw m2x6 art. Msh41122 art. Msh41181 where i can find the parts bag 12.

  • Page 58

    Instructions manual instructions manual 58 magnet canopy support protos 380 art. Msh41182 grub screw m3x14 art. Msh41218 art. Msh41182 where i can find the parts bag 4 + bag 12.

  • Page 59

    Instructions manual instructions manual 59 magnet canopy support protos 380 art. Msh41182 grub screw m3x14 art. Msh41218 art. Msh41182 where i can find the parts bag 4 + bag 12.

  • Page 60

    Instructions manual 60 1 2 fully tighten instructions manual - tail fin alignment.

  • Page 61

    R instructions manual 61 where i can find the parts box + bag 12 painted canopy fg hex screw m2,5x10 art. Msh51143 washer 2,6x6,5x1,5 art. Msh41217 1 2 3 magnet canopy support protos 380 art. Msh41182.

  • Page 62

    R instructions manual 62 where i can find the parts bag 12 1 2 3 velcro loop 380 art. Msh41209.

  • Page 63

    Instructions manual instructions manual 63 where i can find the parts box brain 2 mini art. Msh51635.

  • Page 64

    Instructions manual instructions manual 64 main blade holder protos 380 art. Msh41159 ball m2x4.8 art. Msh41009 main blade holder control arm protos 380 art. Msh41160 ball bearing 5x10x4 art. Msh 5107 art. Msh41159 apply grease on thrust bearing thrust 5x10x4 art. Msh51065 art. Msh41159 washer 5x7,5...

  • Page 65

    Instructions manual specifcation and design are subject to change without notice loctite, uhu plus, spektrum, futaba, hott and multiplex are registered trademarks msheli s.R.L. Uboldo (va) italy.