Proview HV-147 User Manual - page 8
6
LCD TV User Guide
6
ANTENNA CONNECTION
A
N
T
E
N
N
A
C
O
N
N
.
Cable TV (CATV) Connection
A 75-ohm coaxial cable connector is built into the set for easy hookup.
When connecting the 75-ohm coaxial cable to the set, place the 75-ohm cable into
the ANT. terminal.
Some cable TV companies offer premium pay channels. Since the signals of these
premium pay channels are scrambled, a cable TV converter/descrambler is generally
provided to the subscriber by the cable TV company.
This converter/descrambler is necessary for normal viewing scrambled channels.
(Set your TV to channel 3 or 4, typically one of these channels are used.
If this is unknown, consult your cable TV company.)
For more specific instructions on installing cable TV, consult your cable TV company,
One possible method of utilizing the coverter/descrambler provided
by your cable TV company is explained below.
Please note : the RF switch is required to provide two inputs (A and B) . (not included)
A position on the RF switch (not included) ; you can view all unscrambled channels
by using the TV channel keys.
B position on the RF switch (not included) ; you can view all scrambled channels via
the converter/descrambler by using the converter channel keys.
2 set signal
splitter
A
IN
B
OUT
RF switch
Cable TV Line
Cable TV converter/
descrambler
(Not included)
(Not included)
(Not included)
,
This reminder is provided to call the CATV system installer s attention to Article 820-40
of the National Electrical Code (NEC) that provides guidelines for proper grounding
and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building accurately, or as close to the point of cable entry as possible.
Use of this TV for other than private viewing of programs broadcasted on UHF, VHF
or transmitted by cable companies for the use of the general public may require
authorization from the broadcast/cable company, and/or program owner.
NOTE TO CATV SYSTEM INSTALLER