Qhy5 mono/color cmos camera manual qhy5用户手册 v1.0
1 2 qhy5 color cmos camera user manual congratulations on your new qhyccd series purchase! Make sure you read this guide carefully before operating your new camera. Important safety information the cmos chip is fragile. Take extra care when transporting and storing the device. Any significant impact...
Standard equipment make sure that the following items are included in your camera package. If anything is missing, contact the retailer from which you purchased the camera. 3 4 qhy5 camera 1 usb cable 2 m42*0.75 to 1.25 inch adapter 3 guiding cable 4 note: the attachment is supplied by dealers, plea...
5 6 camera interface 1: camera front part 2：m42*0.75 inner screw 3：m28*0.5 1.25 inch filter interface 4：guiding port 5: usb port 1 2 3 4 5 camera drivers installation and quickly mastering 1. Please download last qhy5 system driver from http://www.Qhyccd.Com/download.Html (winusb 64/32version) this ...
7 8 service temperature and humidity of camera service temperature of this camera is from - 20c/-4f to +30c/86f. Relative humidity amount is from 0% to 90%. Qhy5 cmos chip read-out mode qhy5’s cmos chip is single channel and progressive. The camera supports reading out non-compressed video. Clean th...
9 10 qhy5 back foucs length qhy5’s back focus is 12.5mm qhy5 mechianical.
11 12 qhy5 software abc course qgvideo5t is the capture software for qhy5. It’s supports reading out non-compressed video/image data, and it is very suit for capturing solar, moon, or planets. 1. Run qgvideo5t, if the drivers of qhy5 has been installed correctly, and qhy5 has been connected with com...
13 14 www.Qhyccd.Com guiding by using qhy5 in maxim dl qhy5 contains a guiding port, it can be used as a guiding ccd with ascom. Qhy5 uses 1*1 bin and normal download speed default. It can use subframe mode to guide. 1. Connect the qhy5 and the equatorial mount’s guide spot. 2. Run maxim dl, choose ...
15 16 guiding by using qhy5 in phd 1. Connect the qhy5 and the equatorial mount’s guide spot. 2. Run phd, choose connect to camera ( )- ascom v5 camera-cmos qhy5 camera- properties, set gain, click ok to return. 3. Choose mount-on-camera, and then click connect to telescope ( ). 4. Click to expose. ...
