Summary of QM 1000AS
Page 1
User manual model: qm 1000as.
Page 2
1000a user manual 2 contents warnings 3 primary controls 4 specifications 7 common system configuration set ups 8 installation and wiring options 10 related products and accessories 13 trade secrets 14.
Page 3: Qm-1000 Manual
3 warnings qm-1000 manual warning , constant exposure to high ambient sound pressure levels will cause hearing damage. Exposure to extremely high noise levels over long periods of time will cause permanent hearing loss. Many countries have government occupational safety authorities and the following...
Page 4: Description
1000a user manual 4 primary controls description qm1000 overview the compact qm1000/108 flexi-system is a combination sub bass and satellite speaker system powered with three internal amplifiers and controlled from a master input module built into the qm1000 sub bass box. It has a number of operatio...
Page 5
5 1. Stereo – auxiliary mode switch input routing selection switch for stereo sub/satellite or independent multi channel operation. Cable connections and system configuration 2. Left and right f/male xlr- phono inputs. Stereo line level signal inputs to sub bass and satellite amplifiers when aux inp...
Page 6: Basic 2 – Way Mode
1000a user manual 6 7. Sub bass volume volume control for internal 650 watt sub bass amplifier. When used in conjunction with the master l&r input, a balance between the low frequencies of the sub bass and the mid high output from the satellite speakers can be optimised for the venue and the music s...
Page 7
7 frequency response+/- 3db 44 hz - 80-200hz axial sensitivity 1w@lm 99db maximum spl @lm 129db subwoofer amplifier lx 660 w rms / class ab sat & mid/high unit amp 200 w rms @ 8 ohms / class ab connections 2x xlr in, 2x lack mic in 2xxlr out, 2x speakon® satellite outa subwoofer lx 15” height 21.4in...
Page 8: 1. Stereo Full Range Sub
1000a user manual 8 1. Stereo full range sub satellite mode this is the most common configuration for a performer who is using the system as a stereo full range playback for live or pre recorded music. In this configuration, the input volume control acts as a master volume for the whole system and t...
Page 9: Mode With Alternative
9 '(+>p if[wa[hekjfkj .&>p 3ubindependantstereomode h lebkc[ b & & ' ' & a g ' 2. Sub + independent stereo mode with alternative passive speakers this configuration allows the operator to connect alternative satellite speakers and reset the cross- over frequencies from full range to 80 hz or 120 hz ...
Page 10: + 2 Channels Fold-Back
1000a user manual 10 installation and wiring options sub bass + powered speaker front-of-house + 2 channels fold-back when the operator wishes to use powered full range speakers, this configuration allows the qm 1000 to provide sub bass enhancement while also allowing 2 channels of separate fold-bac...
Page 11
11 _dfkjcez[ 7kn b_d[ h_]^j b[\j ekjfkj h lebkc[ b & ' & ' & ' a g if[wa[hekj h_]^j b[\j 1 left and right mixer output to l and r main input 2 select input mode to aux 3 connect xlr line level through output to powered speaker inputs 4 connect mixer fold-back auxillary outputs to qm1000 aux input 1 ...
Page 12: Mono Satellite Speakers
1000a user manual 12 mono satellite speakers + 1 channels fold-back two 200 watt (8 ohm) satellite amplifiers in the qm 1000 makes it possible to connect the two front of house speakers to one speaker output channel and the second output channel can be used as a single channel monitor system. C_n[hc...
Page 13
13 related products and accessories qm15-dwb dolly wheel board qm wsb mounting bracket qm15 transit cover qm 108 qm 10dc qm 12dc additional speakers to suit qm 1000a accessories.
Page 14: Quest Engineering Instant
1000a user manual 14 trade secrets quest engineering instant sound guy course how to avoid distortion in your system whether you are starting with one microphone two turntables and an ipod, or a 48 channels of live band, the audio principles are the same. If you introduce distortion to any part of t...
Page 15
15 how not to turn a mixer into a distortion generator. To avoid overloading the pre amp inputs, always operate the master volume at a high level and control the volume from the input volume. The ideal situation is to have all the components of the audio chain operating at the same operational range...
Page 16: Www.Questaudio.Net
Www.Questaudio.Net register your product thank you for choosing quest. Please take the time to complete your product registration card which is included with the packaging. Registering your quest engineering product will: • confirm your warranty • register your product • protect your new product reg...