Quantum Audio QCA2500D Installation Instructions & Owner's Manual

Summary of QCA2500D

  • Page 1

    Instruction manual • installation instructions / owner’s manual • due to continuous improvement of the product the specifications are subject to change without notice. Limited warranty quantum audio warrants any products purchased in the u.S.A. From an authorized quantum audio dealer. All products a...

  • Page 2

    I ntroduction congratulations on your purchase of a quantum audio state-of-the-art power amplifier. Your selection of a quantum audio car audio product indicates a true appreciation of fine musical reproduction. Whether adding to an existing system or including your db drive amplifier in a new syste...

  • Page 3

    Line out full range line outputs have been provided for convenient connection to additional amplifiers in the system. The outputs are buffered to reduce signal loss. Please note that the amplifier’s input level adjusts these level outputs. Power fusing this protects the amplifier against short circu...

  • Page 4

    5 6 speaker output fuses +12v rem gnd power protect 2500 watts dynamic power class d monoblock amplifier qca2500d 4500 watts dynamic power class d monoblock amplifier qca4500d m ounting location before you start the installation, it will be necessary to find a mounting location for the ampli- fier. ...

  • Page 5

    S ignal connections connect the rca output of the head unit (am/fm cassette player, cd, or dat) to the rca input terminals of the amplifier. To make these connections, we recommend high quality rca cables, which are available at your local car audio retailer. Run signal wires away from electrical wi...

  • Page 6

    S peaker connections (qca4400) make the speaker connections using speaker wire that is at least 16 gauge or heavier. As with any audio component, proper phasing of the amplifier and speakers is essential for strong bass response. When connecting, make sure that positive (+) from the amplifier is con...

  • Page 7

    A djustments and settings the “cozmik series” amplifiers are equipped with built-in variable crossover networks allowing you to select the crossover mode (i.E. Low-pass/full/high-pass or on/off) and the desired crossover point. For example if you wish to drive a pair of subwoofers, you can select th...

  • Page 8

    T rouble shooting the system we have put together this trouble-shooting guide if you experience problems after installing the amplifier. Please keep in mind that the majority of problems incurred are caused by improper installation and not the equipment itself. In addition, there are many components...