Quartech 2800 Manual - page 10
2800 & 2900 Series PLC Drivers
Page 10
DM2829_PLC Revision 2
Idec Micro 3C
Quartech Part Number: 2154-10
Micro 3C
2800/2900
8 Pin Mini DIN
15 Pin Female D-Type
RXD
4 <
)))))))))))))))))))))))
< 2
TXD
TXD
3 <
)))))))))))))))))))))))
< 3
RXD
SC
6 <
))))))))))))0))))))))))
< 7
SC
SC
7 <
))))))))))))-
+)))))
< 4
RTS
.)))))
< 5
CTS
Drain Wire
))))
< 1
FG
Idec Micro 3
Quartech Part Number: 2155-10
Micro 3
2800/2900
8 Pin Mini DIN
15 Pin Female D-Type
RxTxA
2 <
)))))))))))))))))))))))
< 13
RxTxA
TxTxB
1 <
)))))))))))))))))))))))
< 12
RxTxB
SC
7 <
)))))))))))))))))))))))
< 7
SC
+)))))
< 4
RTS
.)))))
< 5
CTS
Drain Wire
))))
< 1
FG
Idec Micro 3 Series
The Micro 3 Series PLC interface varies based on the model. Also both point to point communications and network
communications are available.
ScreenMaker 2000 Port setup:
PLC Type: Micro 3 RS-485, Micro 3C RS-232, Data Link RS-485
Host PLC node address: 0 through 1F hexadecimal
Command Word Address: Internal Relay (M Type), one word
Screen Trigger Address: Data Register (D Type), two contiguous words
Communication format: 7 data bits, 1 stop bit, even parity, 9600 bps.
The following schematics show cable connections required between the OIT and the various Micro 3 ports. Both
cables are available from Quartech in a standard length of ten feet. 2154 cables up to two hundred feet in length may
be ordered. 2155 cables up to fifty feet in length may be ordered.