R & M XGC-1 Specification Sheet

Manual is about: Xtreme Greenhouse Controller Specification Sheet

Summary of XGC-1

  • Page 1

    Xgc-1 xtreme greenhouse controller overview the xgc-1 xtreme greenhouse controller from c.A.P. Controls all of the main devices that are used in today’s modern hydroponic garden. The built-in fuzzy logic controls your co 2 level with unmatched accuracy. Word to the wise... Before attempting to opera...

  • Page 2

    “front panel” overview “the xgc-1 is a self-contained greenhouse control system designed for people who want simply the best all-in-one controller available”. Fuse protected 15-amps @ 120 volts hydro mode selector switch temperature controller (2) light outlets fuzzy logic™ co 2 controller (2) hydro...

  • Page 3

    Start-up procedure overview “there is no substitute for reading and understanding the operating manual however... You can use the instructions on this page for a trouble -free start-up”. How to start-up the xgc 1) locate a suitable source for power. A 3-wire, grounded, 15-amp dedicated circuit is re...

  • Page 4

    “controls” overview “the xgc-1 controls your lights, hydroponic pumps, exhaust fan or a/c, de-humidifier, heater and co 2 level with “part-per-million” accuracy… automatically! No more guesswork! 24 hour timeclock the timeclock selected to run the xgc performs all of the day to night transitions req...

  • Page 5

    Timers overview the xgc-1 uses 2 timers to control the hydroponic pump functions. It also has a 24-hour time-clock which controls your daytime and nightime functions. Adjustable recycling timers the two adjustable recycling timers (art) provide an adjustable “on” / “off” cycle for various devices. T...

  • Page 6

    Fuzzy logic co 2 control overview most people who have used the xgc-1, rate it the best combination controller available today. The fact that the built-in “fuzzy logic” co 2 control system has redefined what true part-per-million co 2 control is really about, may have something to do with it… “suppl...

  • Page 7

    Fuzzy logic co 2 control (continued) how to perform “auto-tuning” the auto-tuning function takes from 1 ½ to 2 ½ hours to complete. Don’t worry. It is completely automatic once the test is started. However, before performing an auto-tuning, you must prepare the area for the procedure. This may take ...

  • Page 8

    Fuzzy logic co 2 control (continued) changing control modes (continued) changing to on / off control mode 1) press and hold the (sel) pushbutton for three seconds. (p will be displayed) 2) press the (sel) button momentarily. (the current proportional band setting will be displayed = 5.0) 3) using th...

  • Page 9

    Options overview the xgc-1 can be upgraded and expanded by using our expansion devices including the upm-1, and the mlc-4. The universal power modules and master lighting controllers allow you to run multiple pumps, fans and lights by controlling remote relays. Universal power module (upm-1) the upm...

  • Page 10

    Troubleshooting if you are having problems with this unit, refer to these troubleshooting hints. Also, refer to the connection diagram to ensure your devices are connected properly. Problem suggested action ♦ i have no lights and no function at all. ♦ check the fuse and main power. Replace the fuse ...

  • Page 11

    Maintenance / specifications precautions 1) please take care in the handling of this precision device. If the unit is dropped or subjected to extreme shock, the calibration may be thrown off. Calibration problems due to abuse, or droppage may affect the warranty. 2) do not expose the xgc-1 to water....