Los 2500 super ceiling sensor installation manual.
Locate the los2500 where it has an unobstructed view of the room, particularly the areas normally occupied by people. If people can not see the sensor lens from their normal positions in the room, the sensor will not detect their presence. High cabinets, walls, columns, doors and other obstructions ...
5 mounting & installation the unit will not turn off lights when power is initially applied until the time delay period (10 secs to 15 minutes) has elapsed. Detection test 1. Walk to an area of the room where normal activity will occur. Remain motionless for 5 seconds. This 5 second period allows th...
7 4. Make sure the sensor is not “seeing” people in other rooms or hallways through open doorways. Mask the lens in the direction of the door. 5. Make sure line voltage has not browned out below 110 volts. If voltage is not adequate sensor will not operate properly. Lights turn on without reason 1. ...
8 note: these instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation, operation or maintenance.. Easy installation & product help tech help line call our experts 888 rab-1000 ©2016 rab lighting inc. Northvale, new jersey ...
