RAD Cycle Products RAD MAX Prozone 1102 Instruction Manual - Safety Recommendations

Summary of RAD MAX Prozone 1102

  • Page 1

    Rad cycle products max racer pro copyright 2011 dtx international instruction manual replace photo rad cycle products 1102 prozone bike trainer instruction manual copyright 2012 dtx international.

  • Page 2: Warranty and Return Policy

    V ride your bike in any type of weather v fits road and mountain bike with 26”, 28” and 700cc wheels v the incredibly quiet, state of the art magnet system instantly creates resistance v seven levels of resistance. Get the most out of your workout with the handlebar resistance control v wide stance ...

  • Page 3: Safety Recommendations

    Safety recommendations parts diagram operating instructions frame rake quick clamp tightening rod tightness adjuster magnetic resistance set warning! To avoid serious injury always follow instructions and safety recommendations. V never use trainer on uneven surfaces, always set up your prozone trai...

  • Page 4: Instruction Manual

    Rad cycle products max racer pro copyright 2011 dtx international instruction manual replace photo a b part a part b assembling 4 copyright 2012 dtx international snap the cylindrical piece of part b into the track in part a. Part b will be placed into the trough on part a. Tighten the knob on part ...

  • Page 5

    1) with a bicycle locked into the trainer, push the blue locking lever down to push the mag roller closest to the rear wheel. [figure 1] 2) begin adjusting the knob counter clockwise [figure 2] to increase friction, or clockwise [figure 3] to decrease friction until the mag roller comes in contact w...

  • Page 6: Operating Instructions

    For best results make sure that your tires are inflated to the maximum pressure allowed for your tire. To avoid unnecessary wear and tear on your bike tires, when not using your prozone trainer, make sure the resistance is set to not touch the tires. To attach your bike to the trainer, first: 1. Unf...

  • Page 7: Using Your Prozone Trainer

    7 copyright 2012 dtx international 6. Thread the cable for the handlebar resistance controls around your bike and mount the resistance controller to your handle- bars. Be sure to attach the controller within easy reach of your hands while riding (figure 9 ). 7. Don’t forget to place the anti-slip le...