RAD Cycle Products RAD MAX Prozone 1102 Instruction Manual - Instruction Manual
of
7
RAD Cycle Products MAX RACER PRO
Copyright 2011 DTX International
INSTRUCTION MANUAL
Replace
Photo
A B
Part A part B
ASSEMBLING
4
Copyright 2012 DTX International
Snap the cylindrical piece of Part B
into the track in part A. Part B will
be placed into the trough on part A.
Tighten the knob on part a until snug.
Parts A & B together
Cross the long bolt with washer
from the small holes marked A to A
for a 28" bike or B to B for a 26" bike.
Using the two wrenches tighten the
lock nut and washer onto the bolt.
Install the two hex screws with plastic
washers into the large holes (A or B)
and tighten with included allen wrench.