Pro pro pro pro series series series series user manual user manual user manual user manual © 2015 radenso®.
Page 1 radar detector radar detector radar detector radar detector radenso radenso radenso radenso pro pro pro pro foreword congratulation to your new investment. You chose one of the best gps enabled mobile radar- and laser detetcor available on the market today. The radenso pro is high tech made i...
Page 2 quick start up guide to start using your radenso pro radar detetcor follow these easy steps: 1. Slide the windshield mounting bracket into the quickmount slot at the front of the radar detector 2. Plug the small end of the power cable into the power jack of radenso pro on the left side of the...
Page 3 function of control buttons power / menu button short press: you will enter into setup menu. During an alert pressing the button mutes the volume. The next alarm will be reported again with the default vol. Long press: turn unit on / off volume buttons [+ - ] short press: changing volume of r...
Page 4 installation the radenso pro windshield mount allows a firm and secure installation of the radar detector at the windshield of your vehicle. Locate an area at the windshield that enables an unobtrusive installation with clear view to the road ahead. 1. Place the nipple of the suction cups in ...
Page 5 control buttons on top and side of unit: le le le left button ft button ft button ft button menu / on menu / on menu / on menu / on----off off off off short press: you will enter into setup menu. During an alert pressing the button will mute the volume. The next alarm will be reported again i...
Page 6 menu and user selectable features press left button to enter menu mode. Press left button again to go from one menu option to the next. Press volume + or – button (on the right side of detector) to change your setting within the category. To save the changed selection simply wait a few second...
Page 7 setting autocity speed the autocity driving mode allows the setting of minimum alert detection speed for signal suppression and signal filtering resulting in 90% reduced false alerts. Select autocity in setting mode setting autocity speed: (feature selectable only if setting mode is set to au...
Page 8 operating frequency: gps: sirf star iv ka narrow: 33.80, 34.7ghz, 35,5ghz (± 120mhz) ka wide: 33.4 ghz - 36.0 ghz k narrow: 24.125ghz (± 70mhz) k wide: 24.125ghz (± 150mhz) x band: 10.525ghz (± 50mhz) laser: 904nm technical parameters: operating temperature: --30° - +180 ° f operating voltage...
