Radimo RADISTAT MAN User Manual
1
R A D I S T A T M A N U S E R M A N U A L
Contents
Introduction
UTN is an electronic thermostat for comfort heating. It combines
elegant simplicity with advanced technology and features a large,
easily read temperature display and Easy2Use buttons for simple
operation. The backlit display is activated by the first press of a
button. UTN thermostats have built-in GFCI (Ground Fault Circuit
Interrupter) to ensure maximum safety.
Setting the temperature
To set the temperature, press the UP or DOWN button until the
required temperature is shown on the display.
The thermostat will calculate the best way to control the heating
in order to obtain the required temperature. Minor adjustments
should first be made after a few hours, depending on floor heating
design.
Ground Fault Circuit Interrupter (GFCI)
The thermostat has a built-in GFCI that ensures personal safety in
case of ground faults.
It is important that the GFCI is checked monthly.
Checking the GFCI
Testing can only be performed while the thermostat
is calling for
heat. Adjust the setpoint until the heating symbol (
) appears.
Use the Up button to increase the heating demand and then press
the OK button. Wait 10 seconds to allow the thermostat to adjust
Up button
OK button
Down button
Standby button
Reset GFCI
GFCI test button
RADISTAT MAN
Introduction ..................................................................................... 1
Setting the temperature ................................................................ 1
Ground Fault Circuit Interrupter (GFCI) ........................................ 1
Checking the GFCI ......................................................................... 1
Settings ........................................................................................... 2
Standby ........................................................................................... 2
Error messages .............................................................................. 2