Radio Shack 12-896 User Manual

Download

Print this page

Bookmark us

AM/FM

Shower Radio

with LCD Alarm Clock

12-896

What’s Included

Specifications

Battery Installation

This shower radio requires two AA batteries (not

supplied) for power, and one LR44 button-cell

battery (supplied) for clock functions.

1. Loosen the screw, and remove the battery

compartment cover.

2. Remove the insulation strip from the button-cell

battery to start the clock function.

3. Insert two AA batteries according to the polarity

markings (+ / -).

4. Replace the cover, and secure the screw.

To replace the button-cell battery, remove the AA

batteries, use a flat screwdriver to remove the old

LR44 button-cell, then insert a new one according to

the polarities (+/ -) marked inside, and reinstall the

AA batteries.

LR44 battery

compartment

Rear

View

MODE

SET

Screw

Cover

Frequency Range ............................. AM 530 – 1700KHz

............................................................ FM 88 – 108MHz

Output Power....................................................... 180mW

Speaker ............................................................... 4 Ohm

Weight

12.20 Oz. (350 g.)

Specifications are typical. Individual units may vary. Specifications are

subject to change and improvement without notice.

Step One

AM/FM radio • LR44 battery (installed) •

Neck strap (attached) •

This document

12-896

Printed in the Philippines

RadioShack and RadioShack.com are

07A03

trademarks used by RadioShack Corporation.

This product is warranted by RadioShack against manufacturing defects in material and workmanship

under normal use for one (1) year from the date of purchase from RadioShack company-owned stores

and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack

MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO

THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS

PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER

OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE

CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING

OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES

RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT

OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of

incidental or consequential damages, so the above limitations or exclusions may not apply to you.

In the event of a product defect during the warranty period, take the product and the RadioShack sales

receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, unless

otherwise provided by law: (a) correct the defect by product repair without charge for parts and labor; (b)

replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced

parts and products, and products on which a refund is made, become the property of RadioShack. New

or reconditioned parts and products may be used in the performance of warranty service. Repaired or

replaced parts and products are warranted for the remainder of the original warranty period. You will be

charged for repair or replacement of the product made after the expiration of the warranty period.

This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse,

accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or

maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other

than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or

batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product

removal, installation, set-up service adjustment or reinstallation.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to

state

RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102

12/99

Limited 1 Year Warranty

BATTERY NOTES

•

Dispose of old batteries promptly and properly.

•

Do not burn or bury batteries.

•

Use only fresh batteries of the required size and

recommended type.

•

Do not mix old and new batteries, different types of

batteries (standard, alkaline, or rechargeable), or

rechargeable batteries of different capacities.

•

If you do not plan to use the radio for several weeks,

remove the batteries. Batteries can leak chemicals that can

damage electronic parts.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

FCC Information

The radio is water resistant, but not waterproof.

Do not hang it where water can wash over it. Use

and store the radio only in room temperature

environments. Handle the radio carefully; do not

drop it. Keep the radio away from dust and dirt, and

wipe it with a damp cloth occasionally to keep it

looking new.

Care

Hanger —

Rotate this into

position to hold

clothes or

towels.

VOL. OFF —

Rotate to turn

the radio on or

off, and to

adjust sound

levels.

TUNING —

Rotate to select

the station you

want to hear.

AM FM — Set

this switch to

select the

band you want

to hear.

Setting the Alarm, Date, and Time

1. Press

SET

. The current alarm time flashes, and

appears.

2. Repeatedly press

MODE

to enable or disable the alarm and chime.

appears

when the chime is on.

appears when the alarm is on.

3. Press

SET

. The hour digits for alarm flash. Repeatedly press

MODE

to adjust the

hour. The alarm hour appears in 12-hour mode,

appears for a PM hour and

appears for a AM hour.

4. Press

SET

again. The minute digits for alarmflash. Repeatedly press

MODE

adjust the minute. The alarm time is now set. Press

SET

to confirm.

5. Press

SET

four times to set the date. The month digits appear. Repeatedly press

MODE

to set the month.

6. Press

SET

again. The day digits appear. Repeatedly press

MODE

to set the day.

7. Press

SET

again to confirm and set the time of day. Press

MODE

to adjust the

hour. In this mode, the clock appears in 12-hour mode,

appears for a PM hour

and

appears for a AM hour. If you want to use 24-hour mode, repeatedly press

MODE

to select the desired mode.

8. Press

SET

again. The current minute digits appear. Repeatedly press

MODE

adjust the minute.

9. Press

SET

again to confirm the setting and return to the time of day. Press

MODE

to start the clock function.

If you enabled the alarm and chime, at the alarm time a tone will sound repeatedly for

approximately one minute. If you have only enabled the chime, a tone will sound once

at the top of each hour (for example, 11:00, 12:00, etc.).

To display the alarm time, date, or seconds, repeatedly press

MODE

Step Two