Radiodetection RD7000 User Manual - page 14

Summary of RD7000

  • Page 1

    User guide.

  • Page 2: About This Guide

    Preface about this guide this guide provides basic operating instructions for the rd7000+ locator and transmitter. It also contains important safety information and guidelines and as such should be read in its entirety before attempting to operate the rd7000+ locator and transmitter. It is also high...

  • Page 3

    Extended warranty thank you for purchasing the rd7000+ locator and transmitter. Rd7000+ locators and transmitters are covered by a 1 year warranty. Customers can extend the warranty to 3 years by registering each product. Registration and extended warranty are free and once registered users will be ...

  • Page 4

    Rd7000+ locator 4 2 1 6 7 8 9 3 5 8 10 11 12 13 15 16 17 18 19 20 22 23 24 25 21 14.

  • Page 5: Locator Features

    Locator features keypad. Lcd screen. Battery compartment (usb connector inside). Accessory socket. Headphone jack. Locator keypad power key: switches the unit on and off. Opens the locator menu. ƒ key: selects frequency/closes submenu. Up and down arrows: adjusts the signal gain/scrolls through menu...

  • Page 6

    Tx-1, tx-3 and tx-10 transmitters 7 1 2 4 5 3 6 8 9 10 11 12 13 14 15 16 17 18 19 20

  • Page 7: Transmitter Features

    Transmitter features keypad. Lcd. Removable accessory tray. Transmitter keypad power key: switches the unit on and off. Opens the transmitter menu. ƒ key: selects frequency. Menu navigation key. Up and down arrows: adjusts the output level signal. Scrolls through the menu options. Measure key: toggl...

  • Page 8: System Setup

    Before you begin important! Please read this section before you attempt to operate the rd7000+! System setup it is important that you set up the system according to your personal preferences and operating requirements for your country before you conduct your first survey. You can set the system up u...

  • Page 9: Transmitter Menu Options

    To navigate the locator menu: first power up the locator. Momentarily press the key to enter the menu. Use the or arrows to scroll through the menu options. Press the key to enter the option’s submenu. Use the or arrows to select the required selection. Press the key to accept your selection and ret...

  • Page 10: Making Changes

    10 examples of using the menu, selecting options and making changes power / mains frequency (locator only) select the correct frequency (50 or 60hz) for your country or region’s national power supply. To change power frequency on the locator: press the key momentarily to enter the menu. Press the or...

  • Page 11: Passive Frequencies

    11 press the locator key or transmitter key to enter the batt submenu. Press the or keys to select the correct battery type. Press the key to accept your selection and return to the main menu. Press the key momentarily to return to the main operation screen. Locating pipes and cables passive frequen...

  • Page 12: Signal Clamps

    1 signal clamps when it is not possible to connect to a pipe or cable using a direct connection lead, a transmitter signal clamp can be connected to the accessory socket of the transmitter and the output signal can be applied. This is particularly useful with live cables as it removes the need to di...

  • Page 13: Installing Centros Manager

    1 centros manager ™ centros manager is a radiodetection pc application which is available as a free download. From time to time radiodetection will release new software for the rd7000+ locator and transmitter which may improve performance, stability and may include new features. The latest software ...

  • Page 14

    1 ecal ™ each time you use a locator you want to be confident that the equipment you are using continues to perform to the same standard as it did when it first left the factory. Ecal provides users with the following features which maybe accessed and carried out on site, without the need to return ...

  • Page 15: Calibration Certificate

    1 using ecal to retrieve the original factory calibration certificate the original factory calibration results for the rd7000+ locator can be retrieved from the unit. Each time the rd7000+ is calibrated either at radiodetection or an approved radiodetection service centre, the calibration results ar...

  • Page 16

    1 important notices when reporting any problems to your radiodetection dealer or supplier it is important to quote the unit serial number and the purchase date. Warning! This equipment is not approved for use in areas where hazardous gases may be present. Warning! When using the transmitter, switch ...

  • Page 17

    1 trademarks rd7000, rd7000+, rd8000, rd4000, flexitrax, surveycert, strikealert, sidestep and ecal are trademarks of radiodetection ltd. Fcc and industry canada statements this device complies with part 15 of the fcc rules. Operation is subject to the following conditions: (1) this device may not c...

  • Page 18

    1 warranty subject to the conditions set out herein, radiodetection limited expressly and exclusively provides the following warranty to original end user buyers of radiodetection products. Radiodetection products include radiodetection, pearpoint, telespec, bicotest, riser bond, dielectric, mark pr...

  • Page 19

    1 this warranty does not cover: periodic maintenance and repair or parts replacement due to wear and tear. Consumables (components that are expected to require periodic replacement during the lifetime of a product such as non rechargeable batteries, bulbs, etc.). Damage or defects caused by use, ope...

  • Page 20

    0 notes.

  • Page 21

    1 notes.

  • Page 22

    90/ug088int/01 america radiodetection 154 portland road, bridgton, me 04009, usa tel: +1 (207) 647 9495 toll free: +1 (877) 247 3797 fax: +1 (207) 647 9496 email: rd.Sales.Us@spx.Com web: www.Radiodetection.Com pearpoint 72055 corporate way, thousand palms ca 92276, usa tel: +1 800 688 8094 tel: +1 ...