- DL manuals
- Radix
- Satellite TV System
- Epsilon 1 FTA
- User Manual
Radix Epsilon 1 FTA User Manual
Summary of Epsilon 1 FTA
Page 1
Version 1.0 page 19 gb users guide read these instructions carefully before using this appliance. • retain for future reference. Radix shall not be liable for damages resulting from improper use of this appliance. Radix electronic vertriebs-gmbh • d-61381 friedrichsdorf • f.R. Germany advanced.
Page 2: Introduction
Page 20 version 1.0 1 introduction thank you for purchasing your radix digital satellite receiver. All radix products are manu- factured to the highest standards at our iso 9002 accredited manufacturing plants. You naturally want to begin viewing your favourite programmes as quickly as possible - th...
Page 3: Contents
Version 1.0 page 21 gb contents 2 contents chapter content page 1 introduction ................................................................................................. 20 2 contents...................................................................................................... 21 3 im...
Page 4: Important Safety Notes
Page 22 version 1.0 3 important safety notes this appliance is designed exclusively for receiving satellite signals as described in this guide. It must not be used for any other purpose. Keep the appliance out of reach of children. To avoid injury and to avoid damaging your receiver, please note the...
Page 5
Version 1.0 page 23 gb 4 your receiver and its functions 4.1 remote control note: when inserting batteries into the remote control unit, make sure that the polarities match (+/-)! Your receiver and its functions number buttons select button (up) select button (down) previous page (preference list) p...
Page 6
Page 24 version 1.0 4.2 connecting the antenna and other devices front of receiver rear of unit, connection to other devices your receiver and its functions selector switch (channel) on/off switch led (four digit display) displays channel number 95v-264v 50/60hz max35w coaxial l audio r warning: war...
Page 7: Installing Your Receiver
Version 1.0 page 25 gb installing your receiver 5 installing your receiver caution: do not place the receiver near any heat sources or in strong sunlight. Protect all cables from damage caused, for example, by sharp edges. This appliance must only be used with a mains voltage of 230 v ( ± 10%), 50 h...
Page 8: Setting Up Your Receiver
Page 26 version 1.0 setting up your receiver 6 setting up your receiver • switch your television on and set it to receiver-receive (av or scart input). • press the power button on your receiver or on your remote control unit. The on message appears on the receivers display and the following screen a...
Page 9: Using Your Receiver
Version 1.0 page 27 gb using your receiver when you have completed these settings, you are ready to begin viewing the pre-programmed chan- nels. To do this you must first activate the factory presets: • press the exit key to download the channel data. After a few moments you will receive a televisio...
Page 10: Using Your Receiver
Page 28 version 1.0 using your receiver 7.4 listening to the radio in addition to television programmes, many broadcasters transmit their radio programmes in digital hifi format. • press the radio key (see section 4.1) to toggle between tv and radio mode. Note: you can only toggle between television...
Page 11: Using Your Receiver
Version 1.0 page 29 gb using your receiver 8 programme lists and information 8.1 preference lists digital television offers you hundreds of channels and it’s easy to lose track of your favourites. To help you find your favourite programmes quickly and easily, you can create preference lists. Several...
Page 12: Using Your Receiver
Page 30 version 1.0 using your receiver 8.2 channel guides and information on channel contents note: the functions described under section 8.2 are only available for previously configured preference lists. Note: information on programme content is not broadcast by all tv broadcasters! 8.2.1 comprehe...
Page 13: Programming Your Receiver
Version 1.0 page 31 gb 9 programming your receiver in the main menu if you want to receive additional or other programs to those which were preset, you can programme the new broadcaster yourself. You can also use a variety of service functions ranging from antenna positioning to preference lists and...
Page 14: Programming Your Receiver
Page 32 version 1.0 in order to include a radio station in your personal list, switch from the complete video list to the com- plete radio list using the radio button. The procedure is the same as above. Radio programs which have been included in your personal list are identified with an “r”. If you...
Page 15: Programming Your Receiver
Version 1.0 page 33 gb 9.3.1 automatic search during automatic search, certain data is already pre-programmed. Standard satellite systems use universal-lnbs with a local oscillator frequency of 9750 mhz for the lower band and 10600 mhz for the lower band. The basic setting for this receiver con- tai...
Page 16: Programming Your Receiver
Page 34 version 1.0 9.3.3 programme data transfer this menu item is included to support specialist retailers. In this way a desired preset can be trans- ferred from a master device to several slave devices. This pre-setting serves the common interests of a group of customers, for example regional or...
Page 17: Programming Your Receiver
Version 1.0 page 35 gb 9.5 antenna control the following settings require highly specialised knowledge and skills. If in doubt, you should have this work carried out by an experienced professional. Requirements: the parabolic antenna must feature a control motor which receives and uses the signal fr...
Page 18: Trouble Shooting
Page 36 version 1.0 10 trouble shooting your digital receiver note: digital communications involve the simultaneous transfer and processing of large amounts of data. Changing channels may takes longer in comparison to analogue devices. An hourglass appears on screen with the message “please wait” wh...
Page 19
Version 1.0 anhang • appendix • appendice • apéndice • appendice • ek technische daten • technical data • caractéristiques techniques datos técnicos • dati tecnici • teknik Özellikler tuner microprocessor and main memories if input frequency 920 ~ 2150mhz microprocessor type mc68340-16(16mhz) if loo...