1. DL manuals
  2. Radstone
  3. Processor
  4. PowerPact
  5. Hardware Product Manual

Radstone PowerPact Hardware Product Manual

Summary of PowerPact

  • Page 1

    Powerpact6 processors family product manual publication no. Cp-0hh 1 st edition, october 2005 © radstone technology plc.

  • Page 2: Copyright Notice

    Copyright notice © radstone technology plc 2005. All rights reserved. This publication is issued to provide outline information only which (unless agreed by the company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a repres...

  • Page 3: Contents

    Powerpact6 processors family product manual 1 st edition contents i contents 1. Introduction ..............................................................................................................................1-1 powerpact6 family overview......................................................

  • Page 4

    Powerpact6 processors family product manual 1 st edition contents ii 5. Standard interfaces .................................................................................................................5-1 compactpci interface .........................................................................

  • Page 5: 1. Introduction

    Powerpact6 processors family product manual 1 st edition 1-1 1. Introduction powerpact6 family overview radstone’s powerpact6 family of 6u rugged compactpci products builds on the established 3u powerpact3 family and the proven designs of its latest vme sbcs, but takes full advantage of the enhanced...

  • Page 6

    Powerpact6 processors family product manual introduction 1 st edition 1-2 input/output capability the powerpact6 processor provides high-density rear i/o for systems requiring sealed box operation and simple card replacement routines for field maintenance. Using rear i/o minimizes the effort require...

  • Page 7

    Powerpact6 processors family product manual introduction 1 st edition 1-3 software support powerpact6 software support options include built in test (bit) and ppcboot firmware, plus bsps and esps for vxworks/tornado from wind river systems, lynxos from lynuxworks and integrity from green hills softw...

  • Page 8

    Powerpact6 processors family product manual introduction 1 st edition 1-4 vxworks/tornado tornado: a highly scaleable and deterministic run-time system, tornado offers distributed backplane and networking support and has a large base of third-party support. Tornado includes a comprehensive suite of ...

  • Page 9

    Powerpact6 processors family product manual introduction 1 st edition 1-5 safety notices safety summary observe the following general safety precautions during operation of this equipment. Failure to comply with these precautions or with specific warnings and/or cautions elsewhere in this manual vio...

  • Page 10

    Powerpact6 processors family product manual introduction 1 st edition 1-6 handling " caution handle powerpact6 processors using the board edges or front panel. Incorrect handling may cause component damage heatsink " caution do not remove the heatsink. There are no proms or other user-alterable comp...

  • Page 11

    Powerpact6 processors family product manual introduction 1 st edition 1-7 about this manual objectives • to guide the reader through configuration, installation and power-up of powerpact6 processors • to provide the user with reference information on the specific powerpact6 processors (cp1a etc.) $ ...

  • Page 12

    Powerpact6 processors family product manual introduction 1 st edition 1-8 conventions all numbers are expressed in decimal, except addresses and memory or register data, which are expressed in hexadecimal. Where confusion may occur, decimal numbers have a ‘d’ subscript and binary numbers have a ‘b’ ...

  • Page 13

    Powerpact6 processors family product manual introduction 1 st edition 1-9 associated documents compactpci bus specification picmg 2.0 r3.0. Ansi/vita 30.1-2002 – 2mm connector equipment practice for conduction-cooled eurocards. Ieee p1386 draft standard for a common mezzanine card family. Ieee p1386...

  • Page 14

    Powerpact6 processors family product manual 1 st edition 2-1 2. Unpacking and inspection unpacking • when you receive the shipping container, inspect it for any evidence of physical damage • if you see any damage, refer to the terms and conditions of sale (provided with your delivery) for further in...

  • Page 15

    Powerpact6 processors family product manual unpacking and inspection 1 st edition 2-2 product code breakdown referring to the example labels shown previously, an alpha-numeric code (cp1a-100040 in the above examples) is printed on the top line of the packaging label, the top middle line of the board...

  • Page 16

    Powerpact6 processors family product manual 1 st edition 3-1 3. Configuration and installation pmc installation two single width (or one double-width) pmcs may be fitted to the powerpact6 processor. There are no pmc keying pins, as the board can be user-configured for 5v or 3.3v signaling. Figure 3-...

  • Page 17

    Powerpact6 processors family product manual configuration and installation 1 st edition 3-2 link configuration board configuration is carried out by the insertion and removal of jumpers (configuration links). Where these links are factory fitted, a default setting is used. For link id, default and r...

  • Page 18

    Powerpact6 processors family product manual configuration and installation 1 st edition 3-3 board installation before installing the powerpact6 processor, review the following warning and caution notices: ! Warning do not exceed the maximum rated input voltages or apply reversed bias to the assembly...

  • Page 19

    Powerpact6 processors family product manual configuration and installation 1 st edition 3-4 observing all antistatic and handling precautions, carry out the following installation procedure: 1) insert the processor into the required slot of the compactpci rack or enclosure. $ notes : a. If the power...

  • Page 20: 4. System

    Powerpact6 processors family product manual 1 st edition 4-1 4. System set-up connection to interact with embedded software (bit, ppcboot or vxworks), an rs232 connection needs to be made to a serial terminal or computer system (pc or xwindows host) running terminal emulation software. To enable int...

  • Page 21

    Powerpact6 processors family product manual system set-up 1 st edition 4-2 figure 4-1. I/o connections.

  • Page 22

    Powerpact6 processors family product manual system set-up 1 st edition 4-3 development system the powerpact6 family supports the cross-development method of application development, as shown in the diagram below. $ note: ip addresses shown are for illustration purposes only. This allows development ...

  • Page 23

    Powerpact6 processors family product manual system set-up 1 st edition 4-4 system software setup software requirements for application development and/or powerpact6 operational checks are as follows: • application development software (tornado 2, lynxos) – provides application development tools • bo...

  • Page 24

    Powerpact6 processors family product manual system set-up 1 st edition 4-5 embedded software setup having configured and installed your powerpact6 processor; installed, set up and started host system software – terminal emulator, ftp server etc.; and determined relevant tcp/ip network settings, you ...

  • Page 25

    Powerpact6 processors family product manual system set-up 1 st edition 4-6 bit radstone’s built in test (bit) software comprises a suite of self-test programs designed to run on the full range of boards and systems manufactured by radstone technology. On power up or hard reset, bit displays a start ...

  • Page 26

    Powerpact6 processors family product manual system set-up 1 st edition 4-7 passed tm 00008000 [hb6 bridge 2 test ] passed tm 00010000 [hb6 bridge 3 test ] passed tm 00020000 [pci usb2 test ] passed tm 00040000 [gpio/floppy/lpt test ] gpio passed tm 00080000 [ps2 keyboard + mouse test ] passed tm 001...

  • Page 27

    Powerpact6 processors family product manual system set-up 1 st edition 4-8 vxworks when booting the target with a vxworks program image provided over a network, the vxworks boot program must be configured to include information about the location of the vxworks image on the host computer’s hard disk...

  • Page 28

    Powerpact6 processors family product manual system set-up 1 st edition 4-9 vxworks copyright 1984-2005 wind river systems, inc. Cpu: radstone cp1a-7447a runtime name: vxworks runtime version: 6.1 bsp version: 2.0/1.0 created: sep 22 2005, 14:38:40 ed&r policy mode: deployed wdb comm type: wdb_comm_e...

  • Page 29: 5. Standard

    Powerpact6 processors family product manual standard interfaces 1 st edition 5-1 5. Standard interfaces compactpci interface the powerpact6 processors implement a 64-bit, 66 mhz compactpci interface, conforming to the picmg 2.0 r3.0 specification. Hot-swap (picmg 2.1) is also implemented. 3.3v signa...

  • Page 30

    Powerpact6 processors family product manual standard interfaces 1 st edition 5-2 j1 connector pinout p in r ow a r ow b r ow c r ow d r ow e r ow f 25 +5v req64~ enum~ +3.3v +5v gnd 24 ad(1) +5v v(io) ad(0) ack64~ gnd 23 +3.3v ad(4) ad(3) +5v ad(2) gnd 22 ad(7) gnd +3.3v ad(6) ad(5) gnd 21 +3.3v ad(...

  • Page 31

    Powerpact6 processors family product manual standard interfaces 1 st edition 5-3 signal descriptions s ignal d escription +5v +5v power connection +3.3v +3.3v power connection -12v -12v power connection. Not used by the powerpact6 processor, but fed to the pmc site +12v +12v power connection. Not us...

  • Page 32

    Powerpact6 processors family product manual standard interfaces 1 st edition 5-4 s ignal d escription req64~ request a 64-bit transfer ack64~ acknowledge 64-bit transfer enum~ system enumeration signal. This is an optional signal used in hot-swap applications rst~ compactpci backplane reset signal t...

  • Page 33

    Powerpact6 processors family product manual standard interfaces 1 st edition 5-5 j2 connector pinout p in r ow a r ow b r ow c r ow d r ow e r ow f 22 ga4 ga3 ga2 ga1 ga0 gnd 21 clk6 gnd no connection no connection no connection gnd 20 clk5 gnd no connection gnd no connection gnd 19 gnd gnd no conne...

  • Page 34

    Powerpact6 processors family product manual standard interfaces 1 st edition 5-6 signal descriptions s ignal d escription ad(32) to ad(63) multiplexed address/data bits 32 to 63 respectively cbe(4)~ command/byte enable for ad(32:39) cbe(5)~ command/byte enable for ad(40:47) cbe(6)~ command/byte enab...

  • Page 35

    Powerpact6 processors family product manual standard interfaces 1 st edition 5-7 geographical address pin assignments s lot ga4 p in j2-a22 ga3 p in j2-b22 ga2 p in j2-c22 ga1 p in j2-d22 ga0 p in j2-e22 1 gnd gnd gnd gnd open 2 gnd gnd gnd open gnd 3 gnd gnd gnd open open 4 gnd gnd open gnd gnd 5 g...

  • Page 36

    Powerpact6 processors family product manual standard interfaces 1 st edition 5-8 pmc interface pmc sites the powerpact6 family has two sets of connectors (j11/j12/j13/j14 and j21/j22/j23/j24) that allow industry-standard pmcs to be fitted to the powerpact6 processor, routed to the j3 and j5 connecto...

  • Page 37

    Powerpact6 processors family product manual standard interfaces 1 st edition 5-9 the ieee p1386.1 standard defines four connectors with pin assignments shown in the following tables. In the tables ‘j’ is the host board connector id (pmc mating connectors have a ‘p’ prefix); the next digit is ‘1’ for...

  • Page 38

    Powerpact6 processors family product manual standard interfaces 1 st edition 5-10 jx3 (64-bit pci) connector pinout p in s ignal p in s ignal 1 reserved (pci) 2 gnd 3 gnd 4 cbe(7)~ 5 cbe(6)~ 6 cbe(5)~ 7 cbe(4)~ 8 gnd 9 vio 10 par64 11 ad(63) 12 ad(62) 13 ad(61) 14 gnd 15 gnd 16 ad(60) 17 ad(59) 18 a...

  • Page 39

    Powerpact6 processors family product manual standard interfaces 1 st edition 5-11 j14 (user i/o) connector pinout j14 is mapped to the j5 backplane connector as follows: j24 (user i/o) connector pinout j24 is mapped to the j3 backplane connector as follows: j14 p in j5 p in j14 p in j5 p in j24 p in...

  • Page 40

    Powerpact6 processors family product manual standard interfaces 1 st edition 5-12 pci/pmc signal descriptions m nemonic d escription ad(0) to ad(63) address/data bits. Multiplexed address and data bus cbe(0)~ to cbe(7)~ command/byte enables. During the address phase, these signals specify the type o...

  • Page 41

    Powerpact6 processors family product manual standard interfaces 1 st edition 5-13 afix interface for enhanced i/o flexibility, the powerpact6 processors offer a ‘plug-on’ module interface that adds rear i/o functionality via j4 and j5. The additional flexible interface xtension (afix) card is a fact...

  • Page 42

    Powerpact6 processors family product manual standard interfaces 1 st edition 5-14 afix connector pinout p in k j h g f e d c b a 1 gnd pci2_ad(18) gnd hdi_g1 gnd tck gnd gnd afix i/o gnd 2 pci2_ad(0) pci2_ad(19) hdi_h2 hdi_g2 clk1 trst pld_data(0) afix i/o afix i/o afix i/o 3 pci2_ad(1) +5v hdi_h3 +...

  • Page 43

    Powerpact6 processors family product manual standard interfaces 1 st edition 5-15 afix signal descriptions m nemonic d escription pci bus pci_ad(0) to pci_ad(31) multiplexed address and data bus pci_cbe(0) to pci_cbe(3) command/byte enables. During the address phase, these signals specify the type o...

  • Page 44

    Powerpact6 processors family product manual standard interfaces 1 st edition 5-16 m nemonic d escription jtag tdi jtag test data input tdo jtag test data output tck jtag test clock tms jtag test mode select trst jtag test reset power and ground +2v5 +2.5v dc power +3v3 +3.3v dc power +5v +5 volts dc...

  • Page 45

    Powerpact6 processors family product manual build styles and dimensions 1 st edition 6-1 6. Build styles and dimensions build styles the powerpact6 family is available in radstone’s five electrically compatible build levels. These have two basic mechanical configurations: ¾ air (convection)-cooled (...

  • Page 46

    Powerpact6 processors family product manual build styles and dimensions 1 st edition 6-2 environmental specifications convection-cooled boards b uild s tyle o perating t emp (°c) s torage t emp (°c) v ibration s hock h umidity c omments level 1 0 to +55 with airflow of 300 feet/minute -50 to +100 0....

  • Page 47

    Powerpact6 processors family product manual build styles and dimensions 1 st edition 6-3 dimensions all build standards of the powerpact6 processors are picmg 2.0 r3.0 compactpci bus specification compatible. This allows all styles of assembly to be fitted into any commercial compactpci bus developm...

  • Page 48

    Powerpact6 processors family product manual build styles and dimensions 1 st edition 6-4 figure 6-2. Additional requirements of ansi/vita 30.1.

  • Page 49: 7. Technical  Support

    Powerpact6 processors family product manual technical support 1 st edition 7-1 7. Technical support in the unlikely event that you experience problems with your powerpact6 processor, contact radstone’s technical assistance. The preferred method is to register support requests using the technical sup...

  • Page 50

    Powerpact6 processors family product manual technical support 1 st edition 7-2 troubleshooting if you are experiencing a problem with your powerpact6 processor, there follow some general suggestions of actions you may take that may resolve the problem without the need to contact radstone’s technical...

  • Page 51: Glossary

    Powerpact6 processors family product manual 1 st edition glossary i glossary $ notes : 1) the pci bus signals are detailed in the pci bus signal descriptions section and the pmc signals are explained in the pmc signal descriptions section. 2) this glossary only features terms special to this manual....

  • Page 52: Index

    Powerpact6 processors family product manual 1 st edition index i index a afix connector ..................................................... 5-14 interface........................................................ 5-13 signal descriptions....................................... 5-15 antistatic precaut...

  • Page 53

    Powerpact6 processors family product manual 1 st edition index ii s safety notices..................................................... 1-5 shock .................................................................. 6-2 signal descriptions afix..............................................................