Cld54d / dnl54d user manual www.Rainbowcctv.Com v1.0 cld54d / dnl54d user manual.
① video output connector (bnc) 1vp-p/75Ω composite video signal output connector. ② osd control controls for osd - on screen display ③ power led this led turns on only when the power is supplied properly and the converter (or the regulator) inside the camera works sell. ④ backfocus mode button elimi...
⑦ camera mount for mounting the camera to standard 1/4-20 mounts this mount can be mounted on the top or bottom of the camera. To install this on the top of the camera, remove the "passed" label first and move the mount from the bottom of the camera. ⑧ backfocus adjustment screw this screw is for pe...
⑬ backfocus lock screw the position of the ccd can be locked into place after final adjustment. Please reference the instructions below. 1. Adjust the backfocus of the camera after installing the lens if you find the lens focus does not provide enough range. 2. Tighten the lock screw on the camera t...
Osd adjustment osd direction & enter button in rear plate * to access osd menu, push the set up button. Osd menu description sub menu lens agc awb mode r-y gain b-y gain sharpness gamma set d&n mode burst color → bw bw → color dly(delay) time mirror lsc hlm blc wide blc mask 1 on/off selectable 0.3,...
Osd menus use the osd adjustment to navigate the menus, press the button for "enter" 1. Lens sel : this menu is for lens application. Lens type lens sel. Shutter switch on side of camera setting dc dc 1/60 (1/50 pal) dc video dc 1/60 (1/50 pal) video manual manual auto n/a shutter speed can also be ...
1. Dn mode : day & night function is selectable as below. * auto : camera will be color during the day and b&w at night * color : camera will remain in color at all times * bw : camera will remain in b&w at all times 2. Burst : burst on/ off is adjustable (only available in auto and ex-cont mode) 3....
This mode allows for up for privacy zones (masks) to cover areas that are not be viewed or recorded up to for zones can be selected (mask 1, 2, 3, 4) after turning the mask on, select set area to create the mask to create a mask area (press enter to switch between the colors below): * when the mask ...
1. Dpc (defective pixel cancelling) set : compensates for white and black defects on the ccd - white th : a white defect is compensated with an adjustment value from 0 to 255 - black th : a black defect is compensated with an adjustment value from 0 to 255 - lum th : a luminance is compensated with ...
Video signal system image sensor image output scanning system resolution (horizontal) sensitivity (f1.2) s/n ratio gamma characteristics effective picture elements synchronization system auto lris control auto electronic shutter (aes) automatic gain control (agc) back light compensation (blc) white ...
Video signal system image sensor image output scanning system resolution (horizontal) sensitivity (f1.2) s/n ratio gamma characteristics effective picture elements synchronization system auto lris control auto electronic shutter (aes) automatic gain control (agc) back light compensation (blc) white ...
